Anyone here have experience with Einscan Pro2XPlus?
-
- I have made <0 posts
- Posts: 1
- Joined: Sun May 24, 2020 1:21 am
- 3
- Full Name: Derek Phelps
- Company Details: GTW
- Company Position Title: CEO
- Country: United States
- Linkedin Profile: No
Anyone here have experience with Einscan Pro2XPlus?
Looking for experienced feedback on this handheld...Price is around 6800 USD...results I've seen on web and demos seem really good w the HD module. Any other input on handhelds under 10k welcomed. Thank you!
- HagaeusBygghantverk
- I have made 30-40 posts
- Posts: 35
- Joined: Tue Feb 04, 2020 10:08 am
- 4
- Full Name: Thomas Hagaeus
- Company Details: Hagaeus Bygghantverk AB
- Company Position Title: Dictator
- Country: Sverige
- Linkedin Profile: Yes
- Has thanked: 24 times
- Been thanked: 5 times
- Contact:
Re: Anyone here have experience with Einscan Pro2XPlus?
I have tried it out. In static/turntable mode it works great for its price. In handheld mode I could not really recommend it unless they update the software. I scanned one side of the object, cut away the floor, approved. Then I scanned the other side, cut, approve and align. The third side ended up crappy so I pressed delete. That deleted the whole project. Turns out you can not just delete the last scan so I had to start all over again.
-
- V.I.P Member
- Posts: 152
- Joined: Sun Apr 19, 2015 1:05 pm
- 8
- Full Name: Alan Roberts
- Company Details: DTM Technologies
- Company Position Title: owner
- Country: United Kingdom
- Linkedin Profile: Yes
- Location: Anglesey, UK
- Contact:
Re: Anyone here have experience with Einscan Pro2XPlus?
would also be interested, have requested a demo via zoom, still waiting, wont want it for reverse engineering, dont think many are good enough for that yet (anything under 25k anyway) but do require a high resolution and decent accuracy, for the likes of heritage general 3d models etc, am currently looking at the peel 2, einscan and eva, eva a bit steep for same results as the cheaper 2