Register 360 export to e57 includes deleted points- Help
-
- I have made 20-30 posts
- Posts: 26
- Joined: Wed Jan 16, 2019 6:18 pm
- 5
- Full Name: Caleb Sayers
- Company Details: VIP AA
- Company Position Title: Architectural Designer
- Country: US
- Linkedin Profile: Yes
- Has thanked: 3 times
- Been thanked: 1 time
Register 360 export to e57 includes deleted points- Help
Need a little help here.
I just did a scan with a BLK360. It's a relatively small building, the project consists of 88 setups. I registered it with Cyclone Register 360, which I found really easy to work with, and overall was really impressed with.
For various reasons, not least of all working in Revit, I need to get the project into ReCap.
I exported it from Register 360 after finalizing, but the e57 file has all of the points that I took hours of clean-up to delete. What gives? How do I fix that so it exports a cleaned-up point cloud?
Thanks!
I just did a scan with a BLK360. It's a relatively small building, the project consists of 88 setups. I registered it with Cyclone Register 360, which I found really easy to work with, and overall was really impressed with.
For various reasons, not least of all working in Revit, I need to get the project into ReCap.
I exported it from Register 360 after finalizing, but the e57 file has all of the points that I took hours of clean-up to delete. What gives? How do I fix that so it exports a cleaned-up point cloud?
Thanks!
- gsisman
- V.I.P Member
- Posts: 898
- Joined: Fri Oct 07, 2016 1:51 pm
- 7
- Full Name: Steve Long
- Company Details: Montgomery County DOT _ MD
- Company Position Title: Land Survey Supervisor
- Country: United States
- Skype Name: gsisman1
- Linkedin Profile: Yes
- Has thanked: 767 times
- Been thanked: 148 times
Re: Register 360 export to e57 includes deleted points- Help
Caleb,DoctaSayas wrote: ↑Fri Mar 15, 2019 8:21 pm Need a little help here.
I just did a scan with a BLK360. It's a relatively small building, the project consists of 88 setups. I registered it with Cyclone Register 360, which I found really easy to work with, and overall was really impressed with.
For various reasons, not least of all working in Revit, I need to get the project into ReCap.
I exported it from Register 360 after finalizing, but the e57 file has all of the points that I took hours of clean-up to delete. What gives? How do I fix that so it exports a cleaned-up point cloud?
Thanks!
I agree with you about the Reg 360 software as long as they add a little bit more of necessary workflow tools in the next versions. I find it easy to work with. Wish there was a splitting of the error shown into Dx, Dy, and Dz errors instead of total 3D when looking at Control fit.
I found the same thing with the E57 going to Recap, not sure if that is accidental or by design (to push more people towards Jetstream and CloudWorks-Leica in-CAD solution).
It doesn't honor the clips -very frustrating. I want E57 because of all the photo stuff. Hoping that gets resolved.
Some of the same issues and some slightly different ones in regards to versions within the same project are noted on this thread:
https://laserscanningforum.com/forum/vi ... 992#p75992
- topogeo
- V.I.P Member
- Posts: 144
- Joined: Fri May 02, 2014 1:38 pm
- 9
- Full Name: piercarlo roasio
- Company Details: studio roasio
- Company Position Title: titolare
- Country: italy
- Linkedin Profile: No
- Has thanked: 24 times
- Been thanked: 25 times
Re: Register 360 export to e57 includes deleted points- Help
In the E57 export the canceled points are maintained.
Only with PTS are ignored
(see the image taken from the help of Register360).
I agree that Register360 is very easy ... but it needs improvement ..
For example, as suggested by Gsismam, error in X.Y.Z for checkpoints.
Piercarlo
Only with PTS are ignored
(see the image taken from the help of Register360).
I agree that Register360 is very easy ... but it needs improvement ..
For example, as suggested by Gsismam, error in X.Y.Z for checkpoints.
Piercarlo
You do not have the required permissions to view the files attached to this post.
-
- I have made <0 posts
- Posts: 8
- Joined: Thu May 30, 2019 2:04 am
- 4
- Full Name: Miguel Guimarães
- Company Details: Miguel J Guimaraes - Serv Top
- Company Position Title: Owner
- Country: Portugal
- Linkedin Profile: No
- Has thanked: 2 times
Re: Register 360 export to e57 includes deleted points- Help
Hi guys.
But with pts the images don´t go into recap, right?
But with pts the images don´t go into recap, right?
- TimJervis
- I have made 80-90 posts
- Posts: 84
- Joined: Mon Mar 04, 2019 8:56 pm
- 5
- Full Name: Tim Jervis
- Company Details: Global Survey
- Company Position Title: Business Development Manager
- Country: New Zealand
- Linkedin Profile: Yes
- Been thanked: 35 times
Re: Register 360 export to e57 includes deleted points- Help
Hey Miguel,
.pts is an unstructured points file, so it won't take any setup information through (so no images). It will be just a single cloud without setups.
Regards,
Tim
Tim
-
- I have made 30-40 posts
- Posts: 39
- Joined: Wed Aug 22, 2018 9:50 am
- 5
- Full Name: Miguel Angelo Morais Antunes
- Company Details: Engineering
- Company Position Title: Surveyor
- Country: Portugal
- Linkedin Profile: No
- Been thanked: 1 time
Re: Register 360 export to e57 includes deleted points- Help
hey ,
With the new version , you can go to settings and below there's written Export cleand point for E57, PTG and PTX formats.
Thanks, Miguel Antunes
With the new version , you can go to settings and below there's written Export cleand point for E57, PTG and PTX formats.
Thanks, Miguel Antunes
-
- I have made 20-30 posts
- Posts: 26
- Joined: Wed Jan 16, 2019 6:18 pm
- 5
- Full Name: Caleb Sayers
- Company Details: VIP AA
- Company Position Title: Architectural Designer
- Country: US
- Linkedin Profile: Yes
- Has thanked: 3 times
- Been thanked: 1 time
- Carbix
- V.I.P Member
- Posts: 236
- Joined: Sat Mar 16, 2019 1:36 am
- 5
- Full Name: Daniel Loney
- Company Details: Excelsior Measuring
- Company Position Title: Owner
- Country: Canada
- Linkedin Profile: Yes
- Location: Canada
- Has thanked: 33 times
- Been thanked: 50 times
- Contact:
Re: Register 360 export to e57 includes deleted points- Help
Im still getting this issue. I un-clicked the box to export cleaned points and im still getting the black points.... so far for PTX and PTG trying E57
-
- I have made <0 posts
- Posts: 3
- Joined: Tue Apr 14, 2020 6:28 pm
- 3
- Full Name: Nikolay Essani
- Company Details: IMED Engineering
- Company Position Title: Design Engineer
- Country: United States
- Linkedin Profile: Yes
- Has thanked: 2 times
Re: Register 360 export to e57 includes deleted points- Help
I'm getting this issue as well. The "export cleaned points" option in the menu seems to do nothing. Has anyone found a solution to this?
- gsisman
- V.I.P Member
- Posts: 898
- Joined: Fri Oct 07, 2016 1:51 pm
- 7
- Full Name: Steve Long
- Company Details: Montgomery County DOT _ MD
- Company Position Title: Land Survey Supervisor
- Country: United States
- Skype Name: gsisman1
- Linkedin Profile: Yes
- Has thanked: 767 times
- Been thanked: 148 times
Re: Register 360 export to e57 includes deleted points- Help
With the new v2020 there are several new options when exporting. One huge one for those exporting to other packages and not using Jetstream is the ability to export Limt Box areas to E57, PTS, PTX, PTG & RCP (the caveat being that those limitbox areas are exported as unified unstructured data and can't import back into Register 360, and probably won't export with any photo bubbles to RCP obviously.
Exporting cleaned points or not exporting them should be controlled in the General Setting Checkbox
You do not have the required permissions to view the files attached to this post.