Database Unable to Connect

Discuss all Leica Geosystems related issues here.
Post Reply
Trent.r.williams.pls
I have made <0 posts
I have made <0 posts
Posts: 2
Joined: Sat Oct 13, 2018 1:51 am
Full Name: Trent Williams
Company Details: ECI
Company Position Title: Surveyor
Country: United States
Linkedin Profile: Yes

Database Unable to Connect

Post by Trent.r.williams.pls » Sat Oct 13, 2018 4:52 pm

Came back to work today to continue registering data and couldn't connect to the database. Tried re-adding the database and ran into this error. Any ideas how to reconnect without just starting over??
You do not have the required permissions to view the files attached to this post.

User avatar
geomontgomery
I have made 30-40 posts
I have made 30-40 posts
Posts: 38
Joined: Thu Sep 13, 2018 3:23 pm
Full Name: George Montgomery
Company Details: ECE Design
Company Position Title: Support Manager
Country: USA
Linkedin Profile: Yes

Re: Database Unable to Connect

Post by geomontgomery » Sat Oct 13, 2018 11:12 pm

Make sure you are connected to your licenses. When you say re-add, what did you actually do?

Trent.r.williams.pls
I have made <0 posts
I have made <0 posts
Posts: 2
Joined: Sat Oct 13, 2018 1:51 am
Full Name: Trent Williams
Company Details: ECI
Company Position Title: Surveyor
Country: United States
Linkedin Profile: Yes

Re: Database Unable to Connect

Post by Trent.r.williams.pls » Thu Oct 25, 2018 8:28 pm

I tried a number of different ways, but I typically go into add a database and explore to the .imp file.

I've done this occasionally when I take work home and switch from a desktop to a laptop and thought I could reconnect this way, but couldn't this time.

User avatar
geomontgomery
I have made 30-40 posts
I have made 30-40 posts
Posts: 38
Joined: Thu Sep 13, 2018 3:23 pm
Full Name: George Montgomery
Company Details: ECE Design
Company Position Title: Support Manager
Country: USA
Linkedin Profile: Yes

Re: Database Unable to Connect

Post by geomontgomery » Thu Oct 25, 2018 9:12 pm

Hey Trent,

Could you try a couple of things?
  • Is the *.imp local on your desktop and your laptop?
  • Move your *.imp file somewhere else and try to connect - such as a new folder on your C:\ drive.
  • Which server are you connecting with? The "Shared" or "Unshared" on the laptop?

Post Reply

Return to “Leica Geosystems”