We have created a 3D model in AutoCAD 3D using 3D point cloud data
Now im trying to import point cloud data and the 3D model into Pointools and have them both aligned.
I can get the point cloud data into Pointools, by exporting it as a .pod file from faro scene.
But when it comes to exporting the model from autocad, i tried exporting it as a .dwg but pointools wont import it at all. So i have tried using the .obj format, which goes into pointools, but its scaled up bigger that the pointcloud.
Look forward to hearing your thoughts
AutoCAD 3D Model into Pointools
-
- V.I.P Member
- Posts: 133
- Joined: Tue Sep 03, 2013 3:45 pm
- 10
- Full Name: Lewis Boxer
- Company Details: Advanced 3D Laser Solutions Ltd
- Company Position Title: Technical Director
- Country: UK
- Linkedin Profile: Yes
- Location: Essex, UK
- Been thanked: 4 times
- Contact:
AutoCAD 3D Model into Pointools
Lewis Boxer
Advanced 3D Laser Solutions Ltd
Technical Director
e: [email protected]
w: www.lasersurveying.com
Advanced 3D Laser Solutions Ltd
Technical Director
e: [email protected]
w: www.lasersurveying.com
-
- I have made 30-40 posts
- Posts: 31
- Joined: Wed Sep 04, 2013 10:06 am
- 10
- Full Name: Felix James
- Company Details: Bentley systems
- Company Position Title: Support Engineer Senior
- Country: England
- Location: London
- Contact:
Re: AutoCAD 3D Model into Pointools
The only options you have for bringing a 3D model in to Pointools are OBJ or 3DS format. It should be coming in at the correct scale. Can you confirm which version of Pointools you are using? If it is coming in large you also have the option of changing the scale under the object properties however this shouldn't be necessary.
- TimBeach
- V.I.P Member
- Posts: 417
- Joined: Thu Sep 27, 2007 8:59 am
- 16
- Full Name: Timothy Beach
- Company Details: Hollis
- Company Position Title: Senior Associate - Measured Surveys
- Country: UK
- Linkedin Profile: Yes
- Location: Ashford, Kent
- Has thanked: 4 times
- Been thanked: 4 times
- Contact:
Re: AutoCAD 3D Model into Pointools
I always found that .3ds worked best for me when getting models from CAD into Pointools.
It did involve going FBX through 3ds max but seemed to work.
Thanks
Tim
It did involve going FBX through 3ds max but seemed to work.
Thanks
Tim