RTC360 scan workflow in realworks

Discuss all Trimble Realworks related issues here.
Post Reply
cpaillot
I have made <0 posts
I have made <0 posts
Posts: 6
Joined: Fri Nov 25, 2016 10:21 am
5
Full Name: PAILLOT
Company Details: HEXATECH ENGINEERING AND CONSULTING
Company Position Title: Joint manager
Country: France
Linkedin Profile: No

RTC360 scan workflow in realworks

Post by cpaillot »

Hello,

I have done some search but I cannot find any information concerning this topic.

I would like to know if the import of scans from RTC360 scanner is possible in realworks?
I know what scanner file format realworks can open but I cannot find what is the fileformat of the scans on RTC360 (is it PTX or LGS?)?

If the import is possible in realworks, I suppose this won't be possible to take benefit from field 360 on site pre registration?
If not, this may be possible to make the registration in register 360 and then transfer E57 files to realworks?

In other words, does anyone has some experience for workflow with RTC360 scanner and Realworks?
badam
V.I.P Member
V.I.P Member
Posts: 242
Joined: Tue May 11, 2021 5:36 pm
Full Name: Adam Berta
Company Details: InnoScan 3D Hungary Kft
Company Position Title: unknown
Country: Hungary
Linkedin Profile: No
Has thanked: 9 times
Been thanked: 50 times
Contact:

Re: RTC360 scan workflow in realworks

Post by badam »

cpaillot wrote: Wed Nov 10, 2021 5:58 pm Hello,

I have done some search but I cannot find any information concerning this topic.

I would like to know if the import of scans from RTC360 scanner is possible in realworks?
I know what scanner file format realworks can open but I cannot find what is the fileformat of the scans on RTC360 (is it PTX or LGS?)?

If the import is possible in realworks, I suppose this won't be possible to take benefit from field 360 on site pre registration?
If not, this may be possible to make the registration in register 360 and then transfer E57 files to realworks?

In other words, does anyone has some experience for workflow with RTC360 scanner and Realworks?
i don't think leica created an rtc360 reader sdk.. it is just a bunch of file, like the p40. you have to import it in either register 360 or register then export as you wish.

(if you buy a leica scanner you have to buy a leica software...)
cpaillot
I have made <0 posts
I have made <0 posts
Posts: 6
Joined: Fri Nov 25, 2016 10:21 am
5
Full Name: PAILLOT
Company Details: HEXATECH ENGINEERING AND CONSULTING
Company Position Title: Joint manager
Country: France
Linkedin Profile: No

Re: RTC360 scan workflow in realworks

Post by cpaillot »

Ok, thank you, that confirms what I thought
User avatar
pburrows145
V.I.P Member
V.I.P Member
Posts: 1966
Joined: Wed Sep 12, 2007 9:16 am
14
Full Name: Paul Burrows
Company Details: Leica Geosystems Europe
Company Position Title: Scanning Solutions Manager - Europe
Country: UK
Linkedin Profile: Yes
Location: UK
Has thanked: 59 times
Been thanked: 69 times

Re: RTC360 scan workflow in realworks

Post by pburrows145 »

Use REG360 and export to E57 if you need data in RealWorks...

Likewise we do not read native Trimble data/projects in REG360...
Pajosh2
I have made 10-20 posts
I have made 10-20 posts
Posts: 15
Joined: Thu Nov 08, 2018 6:12 pm
3
Full Name: Pavel Grée
Company Details: XGEO
Company Position Title: executive one
Country: Czech Republic
Linkedin Profile: No
Has thanked: 5 times

Re: RTC360 scan workflow in realworks

Post by Pajosh2 »

REG360-PTX-Realworks
works fine for P
Post Reply

Return to “Trimble Realworks”