How to combine .part2 scans

Discuss Z+F Laser Control here.
Post Reply
sean2me-2
I have made <0 posts
I have made <0 posts
Posts: 1
Joined: Fri Apr 06, 2018 9:41 pm
3
Full Name: Sean Twomey
Company Details: McElhanney
Company Position Title: Survey Tech
Country: Canada
Linkedin Profile: No

How to combine .part2 scans

Post by sean2me-2 »

Hello;

I recently did a series of four scans. Two were at 1.6mm @10m and the other was 3.2mm @10m. The two finer detailed scans were exported as two files each, prefixed with .part2. I was able to register without these extra scans, and everything looked good. Now I am being told that there is an issue with my data. So obviously I need to do something with these, I assume I need to combine. I thought maybe just having them nearby the software automatically used them, but I guess not.

If anyone has info on this I would be thrilled! I am looking for more insight on this as well. It’s probably got something to do with file size limitations.

Thanks

Sean
User avatar
Peyman Bashiri
V.I.P Member
V.I.P Member
Posts: 366
Joined: Sun Dec 13, 2009 6:32 pm
11
Full Name: Peyman Bashiri
Company Details: Aero Geometrics Canadian Z+F reseller
Company Position Title: Laser scanning and BIM Specialist
Country: Canada
Skype Name: pbashiri2003
Linkedin Profile: Yes
Location: Vancouver,BC
Has thanked: 20 times
Been thanked: 22 times
Contact:

Re: How to combine .part2 scans

Post by Peyman Bashiri »

Hello Sean,
Please contact me, we can set up a meeting and help you with the registration.
Thanks
Peyman
Christoph Held
I have made 60-70 posts
I have made 60-70 posts
Posts: 65
Joined: Wed Sep 05, 2012 4:04 pm
9
Full Name: Christoph Held
Company Details: Zoller+Froehlich GmbH
Company Position Title: Z+F Team
Country: Germany
Been thanked: 1 time

Re: How to combine .part2 scans

Post by Christoph Held »

Hi Sean,

higher resolution scans are split automatically into several files for easier processing. You can merge them, but it is not necessary. The registration will treat them automatically as one scan, as long as the scan position is the same for both parts. Please don't hesitate to contact me directly via email (c.held(at)zf-laser.com) or our support (support(at)zf-laser.com) if you need any further help.
Thank you Peyman for your assistance!

Best regards,
Chris
RJGEOMATICS
Forum Supporter
Forum Supporter
Posts: 133
Joined: Tue Apr 23, 2019 7:20 pm
2
Full Name: Bart Man
Company Details: Laser Scanning
Company Position Title: Passionate about making amazing PCs
Country: Canada
Linkedin Profile: No
Has thanked: 38 times
Been thanked: 61 times

Re: How to combine .part2 scans

Post by RJGEOMATICS »

sean2me-2 wrote: Sun Aug 22, 2021 6:18 am Hello;

I recently did a series of four scans. Two were at 1.6mm @10m and the other was 3.2mm @10m. The two finer detailed scans were exported as two files each, prefixed with .part2. I was able to register without these extra scans, and everything looked good. Now I am being told that there is an issue with my data. So obviously I need to do something with these, I assume I need to combine. I thought maybe just having them nearby the software automatically used them, but I guess not.

If anyone has info on this I would be thrilled! I am looking for more insight on this as well. It’s probably got something to do with file size limitations.

Thanks

Sean
You have Dr. Rob in your Calgary office. When it comes to Z&F there is probably no better source than Chris and Dr. Rob. You have 2 leaders in Calgary plus Chris in Vancouver that know Z&F better than anyone.
Post Reply

Return to “Z+F Laser Control”