I am curious to know if it it possible to import scans from a FARO S150 into an old licence of Trimble Realworks 10.
As the Faro S150 was built after the actual version of Trimble Realworks 10 that I am looking to buy.
Thank you for your help
Keith Rey
Compatibilty beetwin Trimble Realworks 10 and FARO S150
-
- I have made 50-60 posts
- Posts: 59
- Joined: Wed Apr 07, 2010 11:45 am
- 13
- Full Name: Andrea Gavagnin
- Company Details: Geolab.info Gavagnin.com
- Company Position Title: Libero Professionista
- Country: Italy
- Skype Name: andrealowa
- Has thanked: 23 times
- Been thanked: 9 times
Re: Compatibilty beetwin Trimble Realworks 10 and FARO S150
i've a S150 and Trimble Realworks 10.2.2.467 and works fine.
-
- V.I.P Member
- Posts: 202
- Joined: Sun Sep 13, 2015 7:19 pm
- 8
- Full Name: Jared
- Company Details: Sova Surveys Limited
- Company Position Title: Director
- Country: UK
- Skype Name: jaredmatthews
- Linkedin Profile: Yes
- Has thanked: 5 times
- Been thanked: 13 times
- Contact:
Re: Compatibilty beetwin Trimble Realworks 10 and FARO S150
It should work fine.
THere is a "plug-in" that you may need to install or update, called the faro LS SDK. This allows you to import .fls files into realworks.
You can find it at https://www.faro.com/resource/faro-ls-sdk-7/
You will need to create a faro login if you do not have one.
THere is a "plug-in" that you may need to install or update, called the faro LS SDK. This allows you to import .fls files into realworks.
You can find it at https://www.faro.com/resource/faro-ls-sdk-7/
You will need to create a faro login if you do not have one.