Register 360 export to e57 includes deleted points- Help

Discuss Leica Geosystems hardware here.
Post Reply
DoctaSayas
I have made 20-30 posts
I have made 20-30 posts
Posts: 26
Joined: Wed Jan 16, 2019 6:18 pm
5
Full Name: Caleb Sayers
Company Details: VIP AA
Company Position Title: Architectural Designer
Country: US
Linkedin Profile: Yes
Has thanked: 3 times
Been thanked: 1 time

Register 360 export to e57 includes deleted points- Help

Post by DoctaSayas »

Need a little help here.

I just did a scan with a BLK360. It's a relatively small building, the project consists of 88 setups. I registered it with Cyclone Register 360, which I found really easy to work with, and overall was really impressed with.

For various reasons, not least of all working in Revit, I need to get the project into ReCap.

I exported it from Register 360 after finalizing, but the e57 file has all of the points that I took hours of clean-up to delete. What gives? How do I fix that so it exports a cleaned-up point cloud?

Thanks!
User avatar
gsisman
V.I.P Member
V.I.P Member
Posts: 898
Joined: Fri Oct 07, 2016 1:51 pm
7
Full Name: Steve Long
Company Details: Montgomery County DOT _ MD
Company Position Title: Land Survey Supervisor
Country: United States
Skype Name: gsisman1
Linkedin Profile: Yes
Has thanked: 767 times
Been thanked: 149 times

Re: Register 360 export to e57 includes deleted points- Help

Post by gsisman »

DoctaSayas wrote: Fri Mar 15, 2019 8:21 pm Need a little help here.

I just did a scan with a BLK360. It's a relatively small building, the project consists of 88 setups. I registered it with Cyclone Register 360, which I found really easy to work with, and overall was really impressed with.

For various reasons, not least of all working in Revit, I need to get the project into ReCap.

I exported it from Register 360 after finalizing, but the e57 file has all of the points that I took hours of clean-up to delete. What gives? How do I fix that so it exports a cleaned-up point cloud?

Thanks!
Caleb,

I agree with you about the Reg 360 software as long as they add a little bit more of necessary workflow tools in the next versions. I find it easy to work with. Wish there was a splitting of the error shown into Dx, Dy, and Dz errors instead of total 3D when looking at Control fit.
I found the same thing with the E57 going to Recap, not sure if that is accidental or by design (to push more people towards Jetstream and CloudWorks-Leica in-CAD solution).
It doesn't honor the clips -very frustrating. I want E57 because of all the photo stuff. Hoping that gets resolved.
Some of the same issues and some slightly different ones in regards to versions within the same project are noted on this thread:

https://laserscanningforum.com/forum/vi ... 992#p75992
User avatar
topogeo
V.I.P Member
V.I.P Member
Posts: 144
Joined: Fri May 02, 2014 1:38 pm
9
Full Name: piercarlo roasio
Company Details: studio roasio
Company Position Title: titolare
Country: italy
Linkedin Profile: No
Has thanked: 24 times
Been thanked: 25 times

Re: Register 360 export to e57 includes deleted points- Help

Post by topogeo »

In the E57 export the canceled points are maintained.
Only with PTS are ignored
(see the image taken from the help of Register360).

I agree that Register360 is very easy ... but it needs improvement ..
For example, as suggested by Gsismam, error in X.Y.Z for checkpoints.

Piercarlo
You do not have the required permissions to view the files attached to this post.
mjfpfg
I have made <0 posts
I have made <0 posts
Posts: 8
Joined: Thu May 30, 2019 2:04 am
4
Full Name: Miguel Guimarães
Company Details: Miguel J Guimaraes - Serv Top
Company Position Title: Owner
Country: Portugal
Linkedin Profile: No
Has thanked: 2 times

Re: Register 360 export to e57 includes deleted points- Help

Post by mjfpfg »

Hi guys.
But with pts the images don´t go into recap, right?
User avatar
TimJervis
I have made 80-90 posts
I have made 80-90 posts
Posts: 84
Joined: Mon Mar 04, 2019 8:56 pm
5
Full Name: Tim Jervis
Company Details: Global Survey
Company Position Title: Business Development Manager
Country: New Zealand
Linkedin Profile: Yes
Been thanked: 35 times

Re: Register 360 export to e57 includes deleted points- Help

Post by TimJervis »

mjfpfg wrote: Fri May 31, 2019 6:04 pm Hi guys.
But with pts the images don´t go into recap, right?
Hey Miguel,

.pts is an unstructured points file, so it won't take any setup information through (so no images). It will be just a single cloud without setups.
Regards,

Tim
miguel.antunes
I have made 30-40 posts
I have made 30-40 posts
Posts: 39
Joined: Wed Aug 22, 2018 9:50 am
5
Full Name: Miguel Angelo Morais Antunes
Company Details: Engineering
Company Position Title: Surveyor
Country: Portugal
Linkedin Profile: No
Been thanked: 1 time

Re: Register 360 export to e57 includes deleted points- Help

Post by miguel.antunes »

hey ,

With the new version , you can go to settings and below there's written Export cleand point for E57, PTG and PTX formats.

Thanks, Miguel Antunes
DoctaSayas
I have made 20-30 posts
I have made 20-30 posts
Posts: 26
Joined: Wed Jan 16, 2019 6:18 pm
5
Full Name: Caleb Sayers
Company Details: VIP AA
Company Position Title: Architectural Designer
Country: US
Linkedin Profile: Yes
Has thanked: 3 times
Been thanked: 1 time

Re: Register 360 export to e57 includes deleted points- Help

Post by DoctaSayas »

Thanks!

This is a huge improvement!
User avatar
Carbix
V.I.P Member
V.I.P Member
Posts: 236
Joined: Sat Mar 16, 2019 1:36 am
5
Full Name: Daniel Loney
Company Details: Excelsior Measuring
Company Position Title: Owner
Country: Canada
Linkedin Profile: Yes
Location: Canada
Has thanked: 33 times
Been thanked: 50 times
Contact:

Re: Register 360 export to e57 includes deleted points- Help

Post by Carbix »

Im still getting this issue. I un-clicked the box to export cleaned points and im still getting the black points.... so far for PTX and PTG trying E57
Daniel Loney - Owner
Excelsior Measuring inc.
Vancouver - Okanagan - Calgary
www.ExcelsiorLevel.com
nessani
I have made <0 posts
I have made <0 posts
Posts: 3
Joined: Tue Apr 14, 2020 6:28 pm
3
Full Name: Nikolay Essani
Company Details: IMED Engineering
Company Position Title: Design Engineer
Country: United States
Linkedin Profile: Yes
Has thanked: 2 times

Re: Register 360 export to e57 includes deleted points- Help

Post by nessani »

I'm getting this issue as well. The "export cleaned points" option in the menu seems to do nothing. Has anyone found a solution to this?
User avatar
gsisman
V.I.P Member
V.I.P Member
Posts: 898
Joined: Fri Oct 07, 2016 1:51 pm
7
Full Name: Steve Long
Company Details: Montgomery County DOT _ MD
Company Position Title: Land Survey Supervisor
Country: United States
Skype Name: gsisman1
Linkedin Profile: Yes
Has thanked: 767 times
Been thanked: 149 times

Re: Register 360 export to e57 includes deleted points- Help

Post by gsisman »

nessani wrote: Tue Apr 14, 2020 9:34 pm I'm getting this issue as well. The "export cleaned points" option in the menu seems to do nothing. Has anyone found a solution to this?
With the new v2020 there are several new options when exporting. One huge one for those exporting to other packages and not using Jetstream is the ability to export Limt Box areas to E57, PTS, PTX, PTG & RCP (the caveat being that those limitbox areas are exported as unified unstructured data and can't import back into Register 360, and probably won't export with any photo bubbles to RCP obviously.

Exporting cleaned points or not exporting them should be controlled in the General Setting Checkbox




Export_limit_box_2020-04-15_1130.png


Exporting_Cleaned_points_in_alternate_formats_2020-04-15_1140.png
You do not have the required permissions to view the files attached to this post.
Post Reply

Return to “Leica Geosystems”