Cyclone 9.3.2 or any 9.x.x amount of scan files fails
-
- I have made <0 posts
- Posts: 6
- Joined: Mon Jan 07, 2019 7:13 pm
- 5
- Full Name: daniel poidevin
- Company Details: Latinco SA
- Company Position Title: Topografo
- Country: Colombia
- Linkedin Profile: No
Cyclone 9.3.2 or any 9.x.x amount of scan files fails
Regards
Some know how to solve this problem with cyclone:
I create a database and when importing any scan of my p40 to cyclone the progress bar does not advance and after a few minutes it closes.
I open cyclone again, check and import the folders but empty without registration without points without anything.
I've already reviewed. I thought it was the scaner but there are old scans that I had already worked and could open and process and try to import them again it's the same. I need to make a delivery and I can not work
here video
https://youtu.be/wf_ENP7C94I
youtu.be/wf_ENP7C94I
Some know how to solve this problem with cyclone:
I create a database and when importing any scan of my p40 to cyclone the progress bar does not advance and after a few minutes it closes.
I open cyclone again, check and import the folders but empty without registration without points without anything.
I've already reviewed. I thought it was the scaner but there are old scans that I had already worked and could open and process and try to import them again it's the same. I need to make a delivery and I can not work
here video
https://youtu.be/wf_ENP7C94I
youtu.be/wf_ENP7C94I
-
- I have made <0 posts
- Posts: 6
- Joined: Mon Jan 07, 2019 7:13 pm
- 5
- Full Name: daniel poidevin
- Company Details: Latinco SA
- Company Position Title: Topografo
- Country: Colombia
- Linkedin Profile: No
-
- I have made 90-100 posts
- Posts: 99
- Joined: Sat Mar 19, 2011 5:16 am
- 13
- Full Name: Yuelin
- Company Details: Leica Geosystems
- Company Position Title: Lead software engineer
- Country: USA
- Linkedin Profile: No
- Has thanked: 1 time
- Been thanked: 11 times
Re: Cyclone 9.3.2 or any 9.x.x amount of scan files fails
Hi Daniel,
Please check if you have adequate space for the temp folder and database file.
You can also try to partial import single setup each to narrow down which setup is causing the problem.
Please check if you have adequate space for the temp folder and database file.
You can also try to partial import single setup each to narrow down which setup is causing the problem.
-
- I have made <0 posts
- Posts: 6
- Joined: Mon Jan 07, 2019 7:13 pm
- 5
- Full Name: daniel poidevin
- Company Details: Latinco SA
- Company Position Title: Topografo
- Country: Colombia
- Linkedin Profile: No
Re: Cyclone 9.3.2 or any 9.x.x amount of scan files fails
regards
on the hard drive I have enough space, where the temporary folder is located there are 75gb free and where we store the gross scaneos there is 100 gb
My PC has the following features:
core 7 (6700) HQ
16 gb ram ddr4
250 GB DD in solid state (operating system)
1 TB DD
Nvidia geforce 960m 2gb DDR5
excuse my english use google translator
on the hard drive I have enough space, where the temporary folder is located there are 75gb free and where we store the gross scaneos there is 100 gb
My PC has the following features:
core 7 (6700) HQ
16 gb ram ddr4
250 GB DD in solid state (operating system)
1 TB DD
Nvidia geforce 960m 2gb DDR5
excuse my english use google translator
-
- I have made <0 posts
- Posts: 6
- Joined: Mon Jan 07, 2019 7:13 pm
- 5
- Full Name: daniel poidevin
- Company Details: Latinco SA
- Company Position Title: Topografo
- Country: Colombia
- Linkedin Profile: No
Re: Cyclone 9.3.2 or any 9.x.x amount of scan files fails
other video here
https://youtu.be/hhptQUfixu0
youtu.be/hhptQUfixu0
I import a single scan of a large file, and load the record but not the points I do not see the cloud at the beginning I throw an error that said that the had no valid points in the video is not but it came out in the tests I do, it seems that the error is when reading the clouds
https://youtu.be/hhptQUfixu0
youtu.be/hhptQUfixu0
I import a single scan of a large file, and load the record but not the points I do not see the cloud at the beginning I throw an error that said that the had no valid points in the video is not but it came out in the tests I do, it seems that the error is when reading the clouds
-
- V.I.P Member
- Posts: 353
- Joined: Sun Aug 16, 2015 6:48 pm
- 8
- Full Name: Bruce Yager
- Company Details: Rikore Geomatics
- Company Position Title: Department Head
- Country: USA
- Linkedin Profile: No
- Been thanked: 7 times
Re: Cyclone 9.3.2 or any 9.x.x amount of scan files fails
Daniel,
The 75GB may not be enough. Three to four times for the temp file over the scans. So if what you are importing is over 25GB, that may be the reason.
The 75GB may not be enough. Three to four times for the temp file over the scans. So if what you are importing is over 25GB, that may be the reason.
- steves01x
- V.I.P Member
- Posts: 544
- Joined: Tue Jul 21, 2015 3:58 pm
- 8
- Full Name: Steve Smith
- Company Details: Scanning
- Company Position Title: Surveyor
- Country: Scotland
- Linkedin Profile: Yes
- Has thanked: 31 times
- Been thanked: 57 times
Re: Cyclone 9.3.2 or any 9.x.x amount of scan files fails
Is your machine on a network with various security software running? And do you have external hard drives plugged in to the usb ports? I know both of these can cause Cyclone issues!
-
- I have made <0 posts
- Posts: 6
- Joined: Mon Jan 07, 2019 7:13 pm
- 5
- Full Name: daniel poidevin
- Company Details: Latinco SA
- Company Position Title: Topografo
- Country: Colombia
- Linkedin Profile: No
Re: Cyclone 9.3.2 or any 9.x.x amount of scan files fails
regards
there are no external connected or dd usb, the file I try to import weighs 5 gb but I have tried to import minors up to 700 mb but still fails the cyclone
there are no external connected or dd usb, the file I try to import weighs 5 gb but I have tried to import minors up to 700 mb but still fails the cyclone
- steves01x
- V.I.P Member
- Posts: 544
- Joined: Tue Jul 21, 2015 3:58 pm
- 8
- Full Name: Steve Smith
- Company Details: Scanning
- Company Position Title: Surveyor
- Country: Scotland
- Linkedin Profile: Yes
- Has thanked: 31 times
- Been thanked: 57 times
Re: Cyclone 9.3.2 or any 9.x.x amount of scan files fails
Have you installed Cyclone on another PC and tried?
Are you sure the raw data is not corrupt?
Are you sure the raw data is not corrupt?
-
- I have made 80-90 posts
- Posts: 86
- Joined: Tue Jan 20, 2009 12:14 pm
- 15
- Full Name: Thomas Goodliffe
- Company Details: Thomas Goodliffe Surveying Limited
- Company Position Title: Director
- Country: UK
- Linkedin Profile: Yes
- Location: North Norfolk, UK
- Has thanked: 1 time
- Been thanked: 1 time
Re: Cyclone 9.3.2 or any 9.x.x amount of scan files fails
Hello, I wonder how did you resolve this as we are having the same problem importing p40 data? Latest version of cyclone closes and only first scan or first few scans import with a modelspace, no registration etc. Loads of hard disk space available in comparison to the data folder size. Thank you. Tom
Tom Goodliffe
Thomas Goodliffe Surveying Ltd
Thomas Goodliffe Surveying Ltd