Cloudworx Ortho Image Creation

Discuss all Leica Cyclone, Cyclone REGISTER 360 & Cyclone FIELD 360 software here.
Post Reply
LostInTheCloud
I have made <0 posts
I have made <0 posts
Posts: 2
Joined: Mon Nov 20, 2023 4:09 pm
Full Name: Peter Reeve
Company Details: Rigour Survey
Company Position Title: Geospatial Engineer
Country: UK
Linkedin Profile: No

Cloudworx Ortho Image Creation

Post by LostInTheCloud »

Hello,

Does anyone have experience in creating Ortho Images using Cloudworx in Bricscad? I'm looking to create a series of Ortho images of a castle wall I am drawing elevations of. The only images we can get out are limited in size & display a transparency, even with "Silhouette" un-ticked.

Any help would be much appreciated!

Thanks in advance
You do not have the required permissions to view the files attached to this post.
User avatar
Peyman Bashiri
V.I.P Member
V.I.P Member
Posts: 433
Joined: Sun Dec 13, 2009 6:32 pm
14
Full Name: Peyman Bashiri
Company Details: Aero Geometrics Canadian Z+F reseller
Company Position Title: Laser scanning and BIM Specialist
Country: Canada
Skype Name: pbashiri2003
Linkedin Profile: Yes
Location: Vancouver,BC
Has thanked: 57 times
Been thanked: 41 times
Contact:

Re: Cloudworx Ortho Image Creation

Post by Peyman Bashiri »

I am not sure but, I`ll increase the pixle size and try again. Your image size is huge and 1 pixel makes it blurry.
Peyman
User avatar
LeicaUK_RC
V.I.P Member
V.I.P Member
Posts: 777
Joined: Sun Jul 17, 2011 9:30 am
12
Full Name: Phil Marsh
Company Details: Leica Geosystems part of Hexagon
Company Position Title: Reality Capture Director UK
Country: UK
Skype Name: Phil.H.Marsh
Linkedin Profile: Yes
Location: Barnsley, UK
Been thanked: 52 times
Contact:

Re: Cloudworx Ortho Image Creation

Post by LeicaUK_RC »

Why not try them in REG360 and import them to CAD...


youtu.be/689BgTcUjkE
Leica Geosystems
M: 07540 201383
E: [email protected]
W: www.leica-geosystems.com
LostInTheCloud
I have made <0 posts
I have made <0 posts
Posts: 2
Joined: Mon Nov 20, 2023 4:09 pm
Full Name: Peter Reeve
Company Details: Rigour Survey
Company Position Title: Geospatial Engineer
Country: UK
Linkedin Profile: No

Re: Cloudworx Ortho Image Creation

Post by LostInTheCloud »

LeicaUK_RC wrote: Tue Nov 21, 2023 8:35 am Why not try them in REG360 and import them to CAD...


youtu.be/689BgTcUjkE
How do we import our elevation UCS' into REG360 to keep the reference lines the same to avoid distortion?
User avatar
gsisman
V.I.P Member
V.I.P Member
Posts: 927
Joined: Fri Oct 07, 2016 1:51 pm
7
Full Name: Steve Long
Company Details: Montgomery County DOT _ MD
Company Position Title: Land Survey Supervisor
Country: United States
Skype Name: gsisman1
Linkedin Profile: Yes
Has thanked: 785 times
Been thanked: 158 times

Re: Cloudworx Ortho Image Creation

Post by gsisman »

LostInTheCloud wrote: Tue Nov 21, 2023 9:09 am
LeicaUK_RC wrote: Tue Nov 21, 2023 8:35 am Why not try them in REG360 and import them to CAD...


youtu.be/689BgTcUjkE
How do we import our elevation UCS' into REG360 to keep the reference lines the same to avoid distortion?
Are you using an LGS file in Cloudworx or connecting directly to the REG 360 DB?
You must have the USC set in Reg 360 to export it and read it correctly in BricsCAD. I don't know anything about BricsCAD but I've exported Orthos out of Reg 360 for Civil 3D and once you choose the level of detail / Resoltuion pixels and depth they have come in oriented in the work Plan they are really in Facade or in Ortho Plan mode
Post Reply

Return to “Leica Cyclone, Cyclone REGISTER 360 & Cyclone FIELD 360”