ZF 5016 TO 5016A UPGRADE

Discuss Z+F hardware here.
Post Reply
User avatar
Peyman Bashiri
V.I.P Member
V.I.P Member
Posts: 392
Joined: Sun Dec 13, 2009 6:32 pm
12
Full Name: Peyman Bashiri
Company Details: Aero Geometrics Canadian Z+F reseller
Company Position Title: Laser scanning and BIM Specialist
Country: Canada
Skype Name: pbashiri2003
Linkedin Profile: Yes
Location: Vancouver,BC
Has thanked: 35 times
Been thanked: 28 times
Contact:

ZF 5016 TO 5016A UPGRADE

Post by Peyman Bashiri »

Hello,
We just upgrade our #ZF5016 to ZF5016 A.

The 2 MHz Scan - The 5016A features license in tandem with the ZF Control 9.3 firmware gives access to a new scan setting that was previously not available. A full scan can now be taken with Ultra High Resolution and Speed + Quality settings. This equates to about a ~6 minute scan. With a scan set to these parameters, the unit will collect data at 2 million points per second. Please note that other scan settings are not changed.
IMU leveling – The IMU of an Imager 5016 with a 5016A features license is used to calculate the inclination of a scan in the event the dynamic compensator is deactivated or out of range. This works similarly to how the dynamic compensator works when its being used. Information is taken from the IMU sensors to keep scans level throughout a project and mitigate any tilt in scans when the dynamic compensator is not used.
Please feel free to reach out to me if you need more information, demo or sample data.

https://www.youtube.com/watch?v=Oj67s7jz6Xo

youtu.be/Oj67s7jz6Xo
JonnieGodfrey
I have made <0 posts
I have made <0 posts
Posts: 7
Joined: Thu Feb 20, 2014 11:28 am
8
Full Name: Jonnie Godfrey
Company Details: tgraph ltd
Company Position Title: Surveyor and 3D Modeller
Country: United Kingdom
Linkedin Profile: Yes

Re: ZF 5016 TO 5016A UPGRADE

Post by JonnieGodfrey »

Hello Payman,

When you say you upgraded, was it a swap for a new unit or is it possible to get the hardware of an existing 5016 upgraded?

Thanks,


Jonnie
User avatar
Peyman Bashiri
V.I.P Member
V.I.P Member
Posts: 392
Joined: Sun Dec 13, 2009 6:32 pm
12
Full Name: Peyman Bashiri
Company Details: Aero Geometrics Canadian Z+F reseller
Company Position Title: Laser scanning and BIM Specialist
Country: Canada
Skype Name: pbashiri2003
Linkedin Profile: Yes
Location: Vancouver,BC
Has thanked: 35 times
Been thanked: 28 times
Contact:

Re: ZF 5016 TO 5016A UPGRADE

Post by Peyman Bashiri »

Hello Jonnie,

It is a firmware upgrade for ZF5016 to ZF5016A.
Please let me know if you need any assistance.
Peyman
www.aerogeo.com
JonnieGodfrey
I have made <0 posts
I have made <0 posts
Posts: 7
Joined: Thu Feb 20, 2014 11:28 am
8
Full Name: Jonnie Godfrey
Company Details: tgraph ltd
Company Position Title: Surveyor and 3D Modeller
Country: United Kingdom
Linkedin Profile: Yes

Re: ZF 5016 TO 5016A UPGRADE

Post by JonnieGodfrey »

Hello Payman,

That's interesting, I assumed there was a new IMU involved.I will ask the factory for more details.

Thanks,

Jonnie
Post Reply

Return to “Z+F”