Help with Geomagic Studio 12

Discuss Geomagic software here.
Post Reply
Raveen
I have made <0 posts
I have made <0 posts
Posts: 1
Joined: Tue Sep 20, 2022 7:32 pm
1
Full Name: Raveen
Company Details: McMaster University
Company Position Title: Student
Country: Canada

Help with Geomagic Studio 12

Post by Raveen »

Hello!

I know this is a shot in the dark cause its a decade old software. But I'm working for my university to make a reverse engineering workflow for education purposes using a Roland LPX-600, and LPX Studio and Geomagic Studio 12.

My general process has been to take my scanned point cloud then, Wrap -> Mesh Doctor -> Parametric Surface -> Fit Surfaces -> Fit Connections -> Trim and Stitch. I've been able to complete this without any errors but when I try to save the "stitched" model as an STP file, the file has no data (ie 0 KB of data). I can't seem to figure out why it's saving an empty file. If anyone has any ideas, your help would be greatly appreciated!

I can provide any files if needed.
chris_d
I have made 30-40 posts
I have made 30-40 posts
Posts: 39
Joined: Tue Jan 04, 2022 12:15 pm
2
Full Name: Chris Dordoni
Company Details: laser scanning and CAD modeling
Company Position Title: scanning technician
Country: US
Linkedin Profile: No
Has thanked: 2 times
Been thanked: 19 times

Re: Help with Geomagic Studio 12

Post by chris_d »

I don't have specific experience with Geomagic Studio 12; however, with other software sometimes there are options to set such as BREP, or manifold solid.

If your object is not a solid (ie surface only), and you are setting an export option that specifies a solid then you could end up with 0 output.
Post Reply

Return to “Geomagic”