ISO 9001 Certification for a one man show.

To chat about anything else.
Post Reply
RollingCamel
I have made 30-40 posts
I have made 30-40 posts
Posts: 33
Joined: Tue Aug 16, 2016 6:24 pm
7
Full Name: Akram Mousa
Company Details: ReCreate3D
Company Position Title: Founder
Country: UAE
Has thanked: 3 times
Been thanked: 3 times

ISO 9001 Certification for a one man show.

Post by RollingCamel »

Hello all,

I'd like to ask how can one achieve ISO Certification being a lone consultant?

Thanks in Advance.

-Akram
User avatar
Leandre Robitaille
V.I.P Member
V.I.P Member
Posts: 542
Joined: Sat Aug 03, 2019 1:53 am
4
Full Name: Leandre Robitaille
Company Details: Cima+
Company Position Title: Civil Technician - Surveyor
Country: Canada
Has thanked: 61 times
Been thanked: 246 times

Re: ISO 9001 Certification for a one man show.

Post by Leandre Robitaille »

Obviously this resolves around what services your provide but there is a lot of documentation to help you build up your infrastructure in order to get that certification. As far as surveying goes there is not much to it, mostly revolves around calibration, accuracy check, tracking when and where each equipement is being used and by who.
I did participate in getting our ISO9001 certification but I was following instructions.
If I had to start my one man team I would start here;

https://www.iso.org/publication/PUB100406.html
I would buy this book and follow its instructions.
Then I would get an external audit to come in, you would have to speak with the ISO org and figure out someone local to you for this, they will indentify where you have lacking/errors and work on fixing them before going for the actual certification.
Post Reply

Return to “General Chat”