Export clean scans

Discuss Trimble Realworks software here.
Post Reply
Gemmlab
I have made <0 posts
I have made <0 posts
Posts: 9
Joined: Mon Feb 07, 2022 8:24 am
2
Full Name: Francesco Sisani
Company Details: Gemmlab
Company Position Title: Gemmlab
Country: Italy
Linkedin Profile: No
Been thanked: 1 time

Export clean scans

Post by Gemmlab »

Hi
I need to export to recap (from TRW) the cleaned scans (I removed noise windows points ecc ecc in each scans)
Someone can suggest the correct workflow ?

thx

Francesco
mikajahkola
I have made 90-100 posts
I have made 90-100 posts
Posts: 96
Joined: Wed Jul 12, 2017 9:27 pm
6
Full Name: Mika Jahkola
Company Details: Myymore Oy
Company Position Title: Managing Director
Country: Finland
Linkedin Profile: Yes
Location: Espoo, Finland
Has thanked: 19 times
Been thanked: 22 times
Contact:

Re: Export clean scans

Post by mikajahkola »

TRW can export to rcp directly but I prefer to export the scans as individual e57 files and load them to recap skipping registration.
Detailed steps:
In registration mode, select the entire project and click Home/Export/Convert TZF scans..
"do you want to process all stations?" : yes
select options: Output files: E57, Folder: (select folder to hold the E57 files), Sampling type: Sampling by step, step 1, filtering: (none), OK
When TRW is ready, start Recap
click New project / Import point cloud
project name: (give a name), place to save your files (give path to folder)
click "select folder to import" and navigate to the folder holding your e57 files
scan settings: filtering: minimal, advanced: (unselect decimation). Click "import files.
files start importing. Hover over "auto register scans" and select "skip registration"
Go get yourself some coffee, or if your project is large, have a long lunch :D
badam
V.I.P Member
V.I.P Member
Posts: 916
Joined: Tue May 11, 2021 5:36 pm
2
Full Name: Adam Berta
Company Details: InnoScan 3D Hungary Kft
Company Position Title: unknown
Country: Hungary
Linkedin Profile: No
Has thanked: 51 times
Been thanked: 297 times
Contact:

Re: Export clean scans

Post by badam »

mikajahkola wrote: Tue Jun 21, 2022 8:21 pm Go get yourself some coffee, or if your project is large, have a long lunch :D
Or just leave the office for a week or two, if your project really large... :lol:
Gemmlab
I have made <0 posts
I have made <0 posts
Posts: 9
Joined: Mon Feb 07, 2022 8:24 am
2
Full Name: Francesco Sisani
Company Details: Gemmlab
Company Position Title: Gemmlab
Country: Italy
Linkedin Profile: No
Been thanked: 1 time

Re: Export clean scans

Post by Gemmlab »

Hi
thx for reply ... a little bit not smart .. but with this procedure I have in recap also the bubble images or only the point cloud ?

thx
mikajahkola
I have made 90-100 posts
I have made 90-100 posts
Posts: 96
Joined: Wed Jul 12, 2017 9:27 pm
6
Full Name: Mika Jahkola
Company Details: Myymore Oy
Company Position Title: Managing Director
Country: Finland
Linkedin Profile: Yes
Location: Espoo, Finland
Has thanked: 19 times
Been thanked: 22 times
Contact:

Re: Export clean scans

Post by mikajahkola »

Recap will pick the bubble images from the e57 files.
If you would export a single e57 file from production mode you would get the unified point cloud only.
Post Reply

Return to “Trimble Realworks”