Creating a "homogenized point density" of selected area.

Discuss all FARO SCENE related software issues here.
Post Reply
KGEConsult
I have made 10-20 posts
I have made 10-20 posts
Posts: 19
Joined: Thu Apr 20, 2017 9:45 am
Full Name: Dara K
Company Details: Cabinet Olliver
Company Position Title: Engineer
Country: France
Linkedin Profile: No

Creating a "homogenized point density" of selected area.

Post by KGEConsult »

Hi Folks,

Long time cyclone user here, in a new company and trying to get to grips with scene. I am trying to creating separate point cloud (selected from project point cloud), I then want to homogenize the density to 20mm spacing and export it in pts format.

For the moment I cannot create a new point cloud of the selected area. Should I use a clipping box? I do not want to edit anything in the original project scan, just separate a small selected area and export it.

Thanks in advance folks.

DK

geodezja3d_pl
I have made 30-40 posts
I have made 30-40 posts
Posts: 32
Joined: Sat Sep 01, 2018 1:19 pm
Full Name: Jakub Kałaska
Company Details: Geodezja3D_pl
Company Position Title: owner
Country: Poland
Linkedin Profile: Yes
Location: Warsaw, Poland.
Has thanked: 2 times
Contact:

Re: Creating a "homogenized point density" of selected area.

Post by geodezja3d_pl »

I think you have to create project point cloud with the maximum desired resolution.
Then select areas with clipping boxes and export. Then import it to cloudcompare and subsample down.

Regards,
Kuba

Emanuele
I have made <0 posts
I have made <0 posts
Posts: 8
Joined: Wed Apr 29, 2015 8:31 am
Full Name: Emanuele Ferrari
Company Details: Studio FERRARI
Company Position Title: Titolare
Country: Italia
Linkedin Profile: Yes
Location: Castellamonte (TO)

Re: Creating a "homogenized point density" of selected area.

Post by Emanuele »

It is not necessary to create the project point cloud; with the crop box you can export the area of ​​interest in pts / E57 format and use Recap for subsampling at 20 mm

KGEConsult
I have made 10-20 posts
I have made 10-20 posts
Posts: 19
Joined: Thu Apr 20, 2017 9:45 am
Full Name: Dara K
Company Details: Cabinet Olliver
Company Position Title: Engineer
Country: France
Linkedin Profile: No

Re: Creating a "homogenized point density" of selected area.

Post by KGEConsult »

Much appreciated folks. Gonna test these out.

Post Reply

Return to “FARO SCENE”