Points appears again after cleaning

Discuss all FARO SCENE related software issues here.
Post Reply
geodezja3d_pl
I have made <0 posts
I have made <0 posts
Posts: 6
Joined: Sat Sep 01, 2018 1:19 pm
Full Name: Jakub Kałaska
Company Details: Geodezja3D_pl
Company Position Title: owner
Country: Polska
Linkedin Profile: Yes

Points appears again after cleaning

Post by geodezja3d_pl » Thu Oct 11, 2018 10:17 pm

I created project point cloud than made some cleaning which was of course time consuming.
After cleaning up the project all the points I deleted appared again...
I tried another time, cleaned and saved and after opening project point cloud every single point I cleaned is still there.

Other issue. After updating point cloud almost all disapear (big cubes instead of points on the screen).

Any solution to avoid this problems?

User avatar
Felix_the_Cat
I have made 80-90 posts
I have made 80-90 posts
Posts: 81
Joined: Thu Jun 09, 2016 5:44 pm
Full Name: Felix
Company Details: Lockheed Martin
Company Position Title: Senior Member Engineering Staff
Country: USA

Re: Points appears again after cleaning

Post by Felix_the_Cat » Thu Oct 11, 2018 10:26 pm

Big cubes happens to me if the project point cloud creation gets interrupted or the scratch drive or destination drive gets full during creating.

You have to delete the points out of the clouds themselves using 3D or planar view if you want them gone for good. If you delete them out of the project point cloud only they just come back the next time you update the project point cloud.


Sent from my iPhone using Tapatalk

geodezja3d_pl
I have made <0 posts
I have made <0 posts
Posts: 6
Joined: Sat Sep 01, 2018 1:19 pm
Full Name: Jakub Kałaska
Company Details: Geodezja3D_pl
Company Position Title: owner
Country: Polska
Linkedin Profile: Yes

Re: Points appears again after cleaning

Post by geodezja3d_pl » Fri Oct 12, 2018 5:42 am

Cleaned points should not appear unless updating project point cloud.
I can't imagine why they came back after saving or compacting project.

Tookie
I have made 30-40 posts
I have made 30-40 posts
Posts: 33
Joined: Thu Sep 21, 2017 9:43 pm
Full Name: Iain Took
Company Details: WMP
Company Position Title: Dogsbody
Country: United Kingdom
Linkedin Profile: No

Re: Points appears again after cleaning

Post by Tookie » Fri Oct 12, 2018 6:34 am

Edit....

Nevermind wrong software :oops:
Last edited by Tookie on Fri Oct 12, 2018 5:20 pm, edited 1 time in total.

User avatar
3DForensics
Global Moderator
Global Moderator
Posts: 1776
Joined: Mon Aug 03, 2009 1:52 am
Full Name: Eugene Liscio
Company Details: AI2-3D Forensics
Company Position Title: Owner
Skype Name: eliscio
Location: Toronto, Canada
Contact:

Re: Points appears again after cleaning

Post by 3DForensics » Fri Oct 12, 2018 3:21 pm

The project point cloud is an entirely separate entity and once you have deleted points, you must choose to Update by using the drop down icons under the project point cloud button in the Explore tab. Once you update, changes will be permanent. If you just save the project by hitting the save button in the top left, that does not save the edits to the project point cloud. It will save changes to raw scans and scan point clouds though...

Eugene

geodezja3d_pl
I have made <0 posts
I have made <0 posts
Posts: 6
Joined: Sat Sep 01, 2018 1:19 pm
Full Name: Jakub Kałaska
Company Details: Geodezja3D_pl
Company Position Title: owner
Country: Polska
Linkedin Profile: Yes

Re: Points appears again after cleaning

Post by geodezja3d_pl » Sun Oct 21, 2018 4:19 pm

Yes, that's sounds logical. But SCENE is not...

If I update point cloud after deleting points everything appears again or the cloud becomes several cubes instead.

Another issue (with scene 2018 if that matters):
I run function Clipping box -> Export 3D selection
It does not work property for the Scene export the whole cloud, not the selection! I wonder it's 2018 version issue only.

I get mad with this software almost every time I open it.

Post Reply

Return to “FARO SCENE”