Export Scan Locations from R360?
- JLarson
- V.I.P Member
- Posts: 198
- Joined: Mon Jun 14, 2010 4:57 pm
- 13
- Full Name: Jason Larson
- Company Details: VHB
- Company Position Title: Geomatics Manager
- Country: US
- Linkedin Profile: Yes
- Location: New York City
- Has thanked: 1 time
- Been thanked: 25 times
Export Scan Locations from R360?
Is there a way to export the final registered scan location coordinates from Register 360? Looking to get an ASCII point file to import into Microstation to show the scanner locations (and names). I've looked all over but don't see anything.
Jason Larson, PLS
- stevenramsey
- Global Moderator
- Posts: 1937
- Joined: Sun Aug 12, 2007 9:22 pm
- 16
- Full Name: Steven Ramsey
- Company Details: 4DMax
- Company Position Title: Technical Specialist Scanning
- Country: UK
- Skype Name: steven.ramsey
- Linkedin Profile: Yes
- Location: London
- Has thanked: 30 times
- Been thanked: 72 times
- Contact:
Re: Export Scan Locations from R360?
Good question I thought it was in the report but no your right its not there.
May have to go old school and use truview and data mine the metadata or import it in to cyclone core.
May have to go old school and use truview and data mine the metadata or import it in to cyclone core.
- JLarson
- V.I.P Member
- Posts: 198
- Joined: Mon Jun 14, 2010 4:57 pm
- 13
- Full Name: Jason Larson
- Company Details: VHB
- Company Position Title: Geomatics Manager
- Country: US
- Linkedin Profile: Yes
- Location: New York City
- Has thanked: 1 time
- Been thanked: 25 times
Re: Export Scan Locations from R360?
Another quick question: Is there anyway to get at the screen captures created other than in the Report? Can I actually get the captured image files?
Jason Larson, PLS
- geomontgomery
- V.I.P Member
- Posts: 186
- Joined: Thu Sep 13, 2018 3:23 pm
- 5
- Full Name: George Montgomery
- Company Details: ECE Design
- Company Position Title: Support Manager
- Country: USA
- Linkedin Profile: Yes
- Has thanked: 20 times
- Been thanked: 48 times
Re: Export Scan Locations from R360?
If you view your assets tab, you can right click > open the assets and then save them wherever you want. I don't see an easy way to batch save all screenshots/assets at once though.
- JLarson
- V.I.P Member
- Posts: 198
- Joined: Mon Jun 14, 2010 4:57 pm
- 13
- Full Name: Jason Larson
- Company Details: VHB
- Company Position Title: Geomatics Manager
- Country: US
- Linkedin Profile: Yes
- Location: New York City
- Has thanked: 1 time
- Been thanked: 25 times
Re: Export Scan Locations from R360?
There are so many things to like about R360, but there just seems to be a lot of little details missing. We haven't used it in production up till now specifically because of these types of limitations. It's very frustrating because clearly R360 is the way forward, and its hard to continue use Cyclone when I know that it's a lame duck at this point.
Steve - Thanks for looking. We generally show our scan positions on our finished drawings, so getting a point file or something we can import into CADD is important to us.
George - Thanks, I found that method just after I posted the question. Seems like there should be an easier way to select all assets and export. I also noticed that the resolution of the resulting file is quite low (screen resolution). It would be nice if you could bump up the image resolution like you can in Cyclone.
Steve - Thanks for looking. We generally show our scan positions on our finished drawings, so getting a point file or something we can import into CADD is important to us.
George - Thanks, I found that method just after I posted the question. Seems like there should be an easier way to select all assets and export. I also noticed that the resolution of the resulting file is quite low (screen resolution). It would be nice if you could bump up the image resolution like you can in Cyclone.
Jason Larson, PLS