TruViews from Layers (Cyclone Register)

Discuss all Leica Cyclone, Cyclone REGISTER 360 & Cyclone FIELD 360 software here.
Post Reply
User avatar
steves01x
V.I.P Member
V.I.P Member
Posts: 544
Joined: Tue Jul 21, 2015 3:58 pm
8
Full Name: Steve Smith
Company Details: Scanning
Company Position Title: Surveyor
Country: Scotland
Linkedin Profile: Yes
Has thanked: 31 times
Been thanked: 57 times

TruViews from Layers (Cyclone Register)

Post by steves01x »

Hi,

Had a fairly large and odd building to scan over a year ago, nearly 1000 scans, 12+ floors (each with half floors, rooms that covered more than floor etc) basements, attics and shafts. It wasnt scanned in the most ideal of orders due to access / time slots for people with keys to turn up etc...Now TruViews are required.

Is there any way to neatly split a model space up in Cyclone to create TruViews from?

I did attempt to fence areas, and layer it but then i still need to manually select the scans per layer or am i missing something at this stage?

Thanks

Steve
GavFoster
I have made 40-50 posts
I have made 40-50 posts
Posts: 42
Joined: Thu Jul 23, 2009 4:44 pm
14
Full Name: Gavin Foster
Company Details: Offset Services Ltd
Company Position Title: Photogrammetry - Laser Scan
Has thanked: 4 times
Been thanked: 3 times

Re: TruViews from Layers (Cyclone Register)

Post by GavFoster »

Pretty certain there is an option to 'Configure Scan Visibility' or something like that where you can select which scans show based on elevation.
I remember doing this in the past for a multi level scan job.
I'm sure someone who speaks Cyclone much better than me will chip in and tell you exactly how to do it but the option is available at some point when setting up the keyplan.

Gav
User avatar
Phil Marsh
Administrator
Administrator
Posts: 2490
Joined: Sun Aug 12, 2007 2:28 pm
16
Full Name: Phil Marsh
Company Details: Laser Scanning Forum Ltd
Company Position Title: Director
Country: UK
Skype Name: phil.h.marsh
Linkedin Profile: Yes
Location: Barnsley, UK
Has thanked: 117 times
Been thanked: 36 times
Contact:

Re: TruViews from Layers (Cyclone Register)

Post by Phil Marsh »

Two ways...

1. Go back to the registration and create a scanworld per floor by highlighting all the scans on each floor. Then create a keyplan from the modelspace and publish.

2. create one keyplan and turn off the setups by level in the visibility options.
LASER SCANNING FORUM
[email protected]
User avatar
steves01x
V.I.P Member
V.I.P Member
Posts: 544
Joined: Tue Jul 21, 2015 3:58 pm
8
Full Name: Steve Smith
Company Details: Scanning
Company Position Title: Surveyor
Country: Scotland
Linkedin Profile: Yes
Has thanked: 31 times
Been thanked: 57 times

Re: TruViews from Layers (Cyclone Register)

Post by steves01x »

Phil Marsh wrote: Thu Feb 28, 2019 10:13 pm
2. create one keyplan and turn off the setups by level in the visibility options.

Tried this early for one of the floors - works a treat!!

Thank you very much! :D
Post Reply

Return to “Leica Cyclone, Cyclone REGISTER 360 & Cyclone FIELD 360”