LFM register
- GDS
- I have made 30-40 posts
- Posts: 34
- Joined: Mon Feb 16, 2015 8:00 pm
- 9
- Full Name: GDS Team
- Company Details: Scanning Center
- Company Position Title: Manager
- Country: United States
- Linkedin Profile: Yes
LFM register
Does anyone out there have any experience with registering scans in LFM? I have used a couple other programs in the past and just started with a trial of LFM and have a couple questions. All I recieved from LFM was a PDF that wasnt very helpful. Previously I have used Recap and Cyclone. Thanks!
- Matt Young
- Honorary Member
- Posts: 3929
- Joined: Fri Nov 30, 2007 3:03 pm
- 16
- Full Name: Matt Young
- Company Details: Baker Hicks
- Company Position Title: CAD-BIM Lead
- Country: UK
- Linkedin Profile: No
- Has thanked: 45 times
- Been thanked: 40 times
Re: LFM register
Welcome to the Forum John
Sorry your having trouble - I went through the same problem a couple of years ago and I'm afraid I don't remember or if I could, I don't think I could get it all into one post. I'm sure there are some other LFM users on the Forum that can solve the problem for you. As I say... sorry that I can't.
Sorry your having trouble - I went through the same problem a couple of years ago and I'm afraid I don't remember or if I could, I don't think I could get it all into one post. I'm sure there are some other LFM users on the Forum that can solve the problem for you. As I say... sorry that I can't.
If you don't see that there is nothing, then you are kidding yourself.
Re: LFM register
Hi John,
I have asked your LFM Value Added Reseller (Point 3D) to contact you in order to answer any questions you may have or provide further information on anything that is not clear.
I'm not sure which pdf you're referring to but I have attached the help guide that covers data conversion and registration. If you do not feel that this is useful then please feel free to make any suggestions to Greg who will feed that back to us here at LFM.
I hope that helps
Regards,
Jenni
Application Consultant
LFM Software Ltd
I have asked your LFM Value Added Reseller (Point 3D) to contact you in order to answer any questions you may have or provide further information on anything that is not clear.
I'm not sure which pdf you're referring to but I have attached the help guide that covers data conversion and registration. If you do not feel that this is useful then please feel free to make any suggestions to Greg who will feed that back to us here at LFM.
I hope that helps
Regards,
Jenni
Application Consultant
LFM Software Ltd
You do not have the required permissions to view the files attached to this post.
- GDS
- I have made 30-40 posts
- Posts: 34
- Joined: Mon Feb 16, 2015 8:00 pm
- 9
- Full Name: GDS Team
- Company Details: Scanning Center
- Company Position Title: Manager
- Country: United States
- Linkedin Profile: Yes