LFM Server Bubble View only loads single scan
-
- I have made <0 posts
- Posts: 9
- Joined: Tue Mar 10, 2015 9:09 pm
- 9
- Full Name: Derek Wagner
- Company Details: JACOBS Engineering
- Company Position Title: Project Surveyor
- Country: USA
- Linkedin Profile: Yes
LFM Server Bubble View only loads single scan
I am using LFM x64 Server Advanced Mode (4.2.1.8), and have an issue when trying to pick a scan position using the "Bubble" button. Regardless of where I pick on the screen while in the 3D window of Server mode, it displays only the first scan of 312 total. I can load scans manually, but I want to load a scan visually by selecting an area on the screen. Any ideas of what might be going on, or what to look for?
-
- I have made 20-30 posts
- Posts: 27
- Joined: Mon Sep 03, 2012 11:02 am
- 11
- Full Name: Martin Kerfoot
- Company Details: LFM Software Ltd.
- Company Position Title: Channel Manager Asia
- Country: Malaysia
Re: LFM Server Bubble View only loads single scan
Hi Derek,
I think an update of your graphics driver will fix the problem.
I had a similar situation once with selecting volumes in 3D whereby it would centre the volume at 0,0,0. This was fixed by an update to the driver.
Regards,
Martin
I think an update of your graphics driver will fix the problem.
I had a similar situation once with selecting volumes in 3D whereby it would centre the volume at 0,0,0. This was fixed by an update to the driver.
Regards,
Martin