3D model with point cloud import

Discuss Pointools software here.
Post Reply
boxel0
V.I.P Member
V.I.P Member
Posts: 133
Joined: Tue Sep 03, 2013 3:45 pm
10
Full Name: Lewis Boxer
Company Details: Advanced 3D Laser Solutions Ltd
Company Position Title: Technical Director
Country: UK
Linkedin Profile: Yes
Location: Essex, UK
Been thanked: 4 times
Contact:

3D model with point cloud import

Post by boxel0 »

We have modeled a small pump slab, from point cloud data: so whats the best way of importing the 3D model (created in autodesk) into Pointools but keeping it aligned with its original point cloud.
Lewis Boxer
Advanced 3D Laser Solutions Ltd
Technical Director
e: [email protected]
w: www.lasersurveying.com
fj-Bentley
I have made 30-40 posts
I have made 30-40 posts
Posts: 31
Joined: Wed Sep 04, 2013 10:06 am
10
Full Name: Felix James
Company Details: Bentley systems
Company Position Title: Support Engineer Senior
Country: England
Location: London
Contact:

Re: 3D model with point cloud import

Post by fj-Bentley »

You will need to convert your model to either OBJ or 3DS format. After this you will be able to import it in Bentley Pointools.
Post Reply

Return to “Pointools”