ATX 3.0 POWER SUPPLY

To chat about anything else.
Post Reply
dhirota
V.I.P Member
V.I.P Member
Posts: 781
Joined: Sun Nov 01, 2009 11:18 pm
13
Full Name: Dennis Hirota
Company Details: Sam O. Hirota Inc.
Company Position Title: President
Country: USA
Linkedin Profile: Yes
Location: Hawaii, USA
Has thanked: 52 times
Been thanked: 205 times

ATX 3.0 POWER SUPPLY

Post by dhirota »

As I am looking at building another newer PC workstation with PCIe 5, DDR5 components I thought I had sufficient spare PSUs (2X 1000W, 1X 1300W, or 1X 1600W G2 EVGA Gold 80) to pick from. I just discovered that maybe I should have a designated ATX3.0 PSU with the proper connectors to use for the new workstation.

https://www.cclonline.com/article/2123/ ... Need-One-/
1.ATX3.0 PSU - Copy.jpg

https://www.techpowerup.com/forums/thre ... ts.292563/
2. INTEL ATX3.0 16-PIN POWER CONNECTOR - Copy.jpg

https://www.tomshardware.com/news/detai ... ector-leak
3. 600W PCIe 5.0 CABLE - Copy.jpg
You do not have the required permissions to view the files attached to this post.
Dennis Hirota, PhD, PE, LPLS
[email protected]
sim.herrod
V.I.P Member
V.I.P Member
Posts: 321
Joined: Thu Jan 14, 2016 12:26 pm
6
Full Name: Simeon Herrod
Company Details: Terra Measurement Limited
Company Position Title: 3D Data Manager
Country: UK
Linkedin Profile: No
Has thanked: 55 times
Been thanked: 80 times

Re: ATX 3.0 POWER SUPPLY

Post by sim.herrod »

I'm not a huge watcher of tech channel YouTube but Gamers Nexus and JayzTwoCents have some good content regarding ATX 3.0 and the potential issues people may have.
User avatar
smacl
Global Moderator
Global Moderator
Posts: 1073
Joined: Tue Jan 25, 2011 5:12 pm
11
Full Name: Shane MacLaughlin
Company Details: Atlas Computers Ltd
Company Position Title: Managing Director
Country: Ireland
Linkedin Profile: Yes
Location: Ireland
Has thanked: 457 times
Been thanked: 466 times
Contact:

Re: ATX 3.0 POWER SUPPLY

Post by smacl »

sim.herrod wrote: Mon Sep 26, 2022 10:47 am I'm not a huge watcher of tech channel YouTube but Gamers Nexus and JayzTwoCents have some good content regarding ATX 3.0 and the potential issues people may have.
I browse the channels occasionally and came across what I'm guessing is the same video, here for those that haven't seen it https://www.youtube.com/watch?v=K6FiGEAp928 Not sure I'd be an early adopted of the new nVidia cards, certainly not as a retrofit for an existing workstation.
User avatar
robjlg
I have made 40-50 posts
I have made 40-50 posts
Posts: 47
Joined: Mon Aug 19, 2019 11:18 am
3
Full Name: Roberto João Lopes Garcia
Company Details: Laser scanning services
Company Position Title: Owner
Country: BRAZIL
Skype Name: robjlg
Linkedin Profile: Yes
Has thanked: 21 times
Been thanked: 8 times
Contact:

Re: ATX 3.0 POWER SUPPLY

Post by robjlg »

sim.herrod
V.I.P Member
V.I.P Member
Posts: 321
Joined: Thu Jan 14, 2016 12:26 pm
6
Full Name: Simeon Herrod
Company Details: Terra Measurement Limited
Company Position Title: 3D Data Manager
Country: UK
Linkedin Profile: No
Has thanked: 55 times
Been thanked: 80 times

Re: ATX 3.0 POWER SUPPLY

Post by sim.herrod »

smacl wrote: Mon Sep 26, 2022 11:14 am ... certainly not as a retrofit for an existing workstation.
This is why we always go for custom builts rather than DIY...we don't have enough knowledge to not make an expensive mistake.
User avatar
smacl
Global Moderator
Global Moderator
Posts: 1073
Joined: Tue Jan 25, 2011 5:12 pm
11
Full Name: Shane MacLaughlin
Company Details: Atlas Computers Ltd
Company Position Title: Managing Director
Country: Ireland
Linkedin Profile: Yes
Location: Ireland
Has thanked: 457 times
Been thanked: 466 times
Contact:

Re: ATX 3.0 POWER SUPPLY

Post by smacl »

sim.herrod wrote: Mon Sep 26, 2022 2:06 pm
smacl wrote: Mon Sep 26, 2022 11:14 am ... certainly not as a retrofit for an existing workstation.
This is why we always go for custom builts rather than DIY...we don't have enough knowledge to not make an expensive mistake.
You're lucky to have quite a number of good custom builders across the UK who price reasonably for their work, certainly a good way to go where that's an option. Not so much option here in Dublin, plus if I'm honest, I quite enjoy the build process. There are also a number of forums for self builders where people will may parts recommendations and check your own build list for mistakes and inefficiencies.
sim.herrod
V.I.P Member
V.I.P Member
Posts: 321
Joined: Thu Jan 14, 2016 12:26 pm
6
Full Name: Simeon Herrod
Company Details: Terra Measurement Limited
Company Position Title: 3D Data Manager
Country: UK
Linkedin Profile: No
Has thanked: 55 times
Been thanked: 80 times

Re: ATX 3.0 POWER SUPPLY

Post by sim.herrod »

smacl wrote: Mon Sep 26, 2022 2:25 pm You're lucky to have quite a number of good custom builders across the UK who price reasonably for their work, certainly a good way to go where that's an option. Not so much option here in Dublin, plus if I'm honest, I quite enjoy the build process. There are also a number of forums for self builders where people will may parts recommendations and check your own build list for mistakes and inefficiencies.
Yeah, the company we use are only a small premium over and above what we could buy the parts for, plus the work (as well as the parts obviously) is warrantied.

I'm going to have a crack at building a system for myself, but that's a bit different to speccing and building a £10k+ workstation with someone elses money. :D
Post Reply

Return to “General Chat”