Hello from Missouri, USA
-
- I have made 10-20 posts
- Posts: 13
- Joined: Thu Aug 02, 2018 5:13 pm
- 5
- Full Name: Adam
- Company Details: Manufacturing
- Company Position Title: Engineer
- Country: United States
Hello from Missouri, USA
I am a project engineer for an automotive company. We are installing many new production lines. As we do so, we are working with our contractors to have them model all utilities and utilize BIM 360 Glue for collaboration. My goal now is to use a RTC360 to scan the existing building and utilities to provide them to aid in their design. At this time I want looking to learn how to best tie in the scan data with modeled 3D data.
- Jason Warren
- Administrator
- Posts: 4224
- Joined: Thu Aug 16, 2007 9:21 am
- 16
- Full Name: Jason Warren
- Company Details: Laser Scanning Forum Ltd
- Company Position Title: Co-Founder
- Country: UK
- Skype Name: jason_warren
- Linkedin Profile: No
- Location: Retford, UK
- Has thanked: 443 times
- Been thanked: 246 times
- Contact:
Re: Hello from Missouri, USA
Hello Adam,
Welcome to the Laser Scanning Forum...
Welcome to the Laser Scanning Forum...
Jason Warren
Co_Founder
Dedicated to 3D Laser Scanning
LaserScanningForum
Co_Founder
Dedicated to 3D Laser Scanning
LaserScanningForum
-
- V.I.P Member
- Posts: 353
- Joined: Sun Aug 16, 2015 6:48 pm
- 8
- Full Name: Bruce Yager
- Company Details: Rikore Geomatics
- Company Position Title: Department Head
- Country: USA
- Linkedin Profile: No
- Been thanked: 7 times
Re: Hello from Missouri, USA
Adam,
Welcome to the forum. In a week or so Leica in Norcross GA is having a HDS University. You can learn a lot from their trainers during the week. There are a lot of options to do what you are looking to do.
Welcome to the forum. In a week or so Leica in Norcross GA is having a HDS University. You can learn a lot from their trainers during the week. There are a lot of options to do what you are looking to do.
-
- I have made <0 posts
- Posts: 1
- Joined: Mon Apr 29, 2019 7:08 pm
- 4
- Full Name: Beau L Bebout
- Company Details: Bassett Mechanical
- Company Position Title: CAD Designer and Systems Manager
- Country: United States
- Linkedin Profile: Yes
Re: Hello from Missouri, USA
Adam,
What did you find was the best solution? We're going through the same workflow using Revit Fabrication parts and the RTC360. I'm trialing Glue to test it's .pts, .rvt and .nwd capabilities along with utilizing a .nwd as a standalone for review by our field personnel.
What did you find was the best solution? We're going through the same workflow using Revit Fabrication parts and the RTC360. I'm trialing Glue to test it's .pts, .rvt and .nwd capabilities along with utilizing a .nwd as a standalone for review by our field personnel.