processing Artec Eva scans with other software then Artec Studio

Please post all your polls you want others opinion on.
Post Reply
[email protected]
I have made <0 posts
I have made <0 posts
Posts: 3
Joined: Mon Feb 06, 2023 9:45 am
1
Full Name: Johan Melotte
Company Details: Johan Melotte
Company Position Title: owner
Country: België
Linkedin Profile: No

processing Artec Eva scans with other software then Artec Studio

Post by [email protected] »

Hello,
I am new to this forum.
So let me present myself.
I am an artist who uses the raw scanning data from 3d scanning (point clouds) in projects in 3D sculpting software like Zbrush to finally produce a mesh that can be printed or milled to artistic objects (statues).
This way I have gathered a huge library of raw scan data from 3D scanning human subjects (nudes).
For the 3D scanning I have used an Artec Eva scanner and I must say, I am very happy with the scan results. The scans are very accurate with a high level of detail.
Is anyone of you, members of this forum, familiar with processing the raw data gathered from Artec Eva with a scanning software other then Artec Studio?
Raw data that is gathered with the Artec Eva scanner comes always in the form of files with extension .dscan, .mscan and .tscan.
I look forward reading your replies.
Best regards,
Johan
rapidscan3d
I have made 30-40 posts
I have made 30-40 posts
Posts: 38
Joined: Mon Nov 26, 2012 11:43 pm
11
Full Name: Rapid Scan 3D
Company Details: Rapid Scan 3D specialize in 3D Scanning
Company Position Title: Director
Country: USA
Skype Name: rapid scan
Linkedin Profile: Yes

Re: processing Artec Eva scans with other software then Artec Studio

Post by rapidscan3d »

The only other way to process the data not in Artec Studio is to process it in Artec Cloud. You should have a free license up to a certain amount of data. You basically can send to cloud to process the data. Other than that you will have to process the data to the mesh file.

I am happy to answer any questions

Chris Strong
Rapid Scan 3D
[email protected]
Artec 3D Reseller / Ambassador
[email protected]
I have made <0 posts
I have made <0 posts
Posts: 3
Joined: Mon Feb 06, 2023 9:45 am
1
Full Name: Johan Melotte
Company Details: Johan Melotte
Company Position Title: owner
Country: België
Linkedin Profile: No

Re: processing Artec Eva scans with other software then Artec Studio

Post by [email protected] »

Thank you for this info.
I did not know there was something lke cloud processing in Artec.
3D_scan_dude
I have made 10-20 posts
I have made 10-20 posts
Posts: 10
Joined: Sat Apr 22, 2023 2:52 pm
Full Name: John Henry
Company Details: DuBold Design
Company Position Title: DuBold Design
Country: United States
Linkedin Profile: No
Been thanked: 2 times

Re: processing Artec Eva scans with other software then Artec Studio

Post by 3D_scan_dude »

Artec Studio is the worst! Its so clunky. I dont think you have any choice when using Artec hardware unfortunately.
User avatar
Artec Group
I have made 30-40 posts
I have made 30-40 posts
Posts: 37
Joined: Fri Apr 04, 2014 12:57 pm
9
Full Name: Agata Serebrennikova
Company Details: Artec3D
Company Position Title: Head of Technical Support Department
Country: Luxembourg
Linkedin Profile: No
Been thanked: 2 times
Contact:

Re: processing Artec Eva scans with other software then Artec Studio

Post by Artec Group »

[email protected] wrote: Wed Feb 15, 2023 3:13 am Thank you for this info.
I did not know there was something lke cloud processing in Artec.
Hello Johan,

Thank you for choosing Artec3D scanner. We are happy to see that you are pleased with the scan results.
We invite you to explore Artec Cloud, our online platform that allows you to securely store, share, and collaborate on your 3D scan data, plus in Artec Cloud there are processing features available as Beta functionality. You can find more information about Artec Cloud here: https://www.artec3d.com/3d-software/artec-cloud.
Additionally, we have a webinar on body scanning, which might be of interest to you. You can watch it here: https://www.youtube.com/watch?v=o7VnnFLBE3M
--
Best regards!

Agata Serebrennikova
Head of Technical Support Department
[email protected]
www.artec3d.com
Post Reply

Return to “Opinion Polls”