Leica P40 GEV228 Ethernet Cable

CAD Workstations, Network Attached Storage [NAS], Servers, Monitors, SSD`s, Imaging Systems, Field Kit: Targets & Tripods etc.
Post Reply
User avatar
kamac93
I have made <0 posts
I have made <0 posts
Posts: 7
Joined: Tue Nov 06, 2018 8:01 am
5
Full Name: Kamil Machaj
Company Details: RM Surveys
Company Position Title: Surveyor
Country: Australia
Linkedin Profile: No

Leica P40 GEV228 Ethernet Cable

Post by kamac93 »

Hi everyone,

I have accidentally broken the casing Lemo end of my transfer cable. I am trying to find the exact piece to replace it. However I am having issues on seeing what specific part I need, as the Leica manual only states the cable name being GEV228.

I have found the piece (link below), which I believe will work.

https://au.rs-online.com/web/p/products ... lsrc=aw.ds

Has anyone else had to replace this part?

Any information would gladly be appreciated.

Kind Regards,

Kamil
User avatar
Phil Marsh
Administrator
Administrator
Posts: 2490
Joined: Sun Aug 12, 2007 2:28 pm
16
Full Name: Phil Marsh
Company Details: Laser Scanning Forum Ltd
Company Position Title: Director
Country: UK
Skype Name: phil.h.marsh
Linkedin Profile: Yes
Location: Barnsley, UK
Has thanked: 119 times
Been thanked: 36 times
Contact:

Re: Leica P40 GEV228 Ethernet Cable

Post by Phil Marsh »

Probably easier to just buy the whole cable...

http://www.mpsurvey.co.uk/product/leica ... ata-cable/
LASER SCANNING FORUM
[email protected]
User avatar
kamac93
I have made <0 posts
I have made <0 posts
Posts: 7
Joined: Tue Nov 06, 2018 8:01 am
5
Full Name: Kamil Machaj
Company Details: RM Surveys
Company Position Title: Surveyor
Country: Australia
Linkedin Profile: No

Re: Leica P40 GEV228 Ethernet Cable

Post by kamac93 »

£17 vs £102 though...

Rest of the cable is in good condition.
User avatar
danielgadowski
V.I.P Member
V.I.P Member
Posts: 452
Joined: Mon Jun 30, 2008 3:49 pm
15
Full Name: Daniel Gadowski
Company Details: Transport for London
Company Position Title: Senior Engineer
Country: UK
Linkedin Profile: Yes
Been thanked: 1 time

Re: Leica P40 GEV228 Ethernet Cable

Post by danielgadowski »

Kamil I think the main issue might be knowing the pinout and knowing which cable goes to which connector. . There are 8 connectors there and I assume things can go south on you if you solder them on wrong and its your scanner that's on the line :/ $80 is not that much of a cost if you think about that.
Post Reply

Return to “Other Hardware: Field & Back Office”