Increasing scan distances in Scene after registration?

Discuss FARO hardware here.
Post Reply
fobos8
V.I.P Member
V.I.P Member
Posts: 246
Joined: Sat Jul 07, 2018 9:19 pm
5
Full Name: Andrew
Company Details: NDC Surveys
Company Position Title: Surveyor
Country: Uk
Linkedin Profile: No
Has thanked: 56 times
Been thanked: 22 times

Increasing scan distances in Scene after registration?

Post by fobos8 »

Hi guys
I scanned an area with my Faro and when I processed in Scene I capped the distance of points from the scanner at 50m using the distance filter. The project has been registered but there is an area of interest about 75 meters away from one of the scanner positions.

Is there a procedure in Scene that will allow me to re-process some of the scans so my area of interest in included?

I see in Scene that it's possible to process scans after they've been registered and I've tried to do this but the distance is still capped at the original processing distance of 50m.

Kind regards, Andrew
User avatar
landmeterbeuckx
V.I.P Member
V.I.P Member
Posts: 1615
Joined: Tue May 01, 2012 5:19 pm
11
Full Name: Lieven Beuckx
Company Details: Studiebureau Beuckx
Company Position Title: Owner
Country: Belgium
Linkedin Profile: Yes
Has thanked: 183 times
Been thanked: 548 times

Re: Increasing scan distances in Scene after registration?

Post by landmeterbeuckx »

fobos8 wrote: Fri May 20, 2022 8:10 am Hi guys
I scanned an area with my Faro and when I processed in Scene I capped the distance of points from the scanner at 50m using the distance filter. The project has been registered but there is an area of interest about 75 meters away from one of the scanner positions.

Is there a procedure in Scene that will allow me to re-process some of the scans so my area of interest in included?

I see in Scene that it's possible to process scans after they've been registered and I've tried to do this but the distance is still capped at the original processing distance of 50m.

Kind regards, Andrew
I would write the numbers for rotation etc after reg for the scans you want to extend and then make a new project, import all but delete the ones not of interest and reset your values.
LSBbvba
Surveying services - 3D Laserscanning
Tel : +32477753126
www.lsbbvba.be
[email protected]
User avatar
robjlg
I have made 50-60 posts
I have made 50-60 posts
Posts: 54
Joined: Mon Aug 19, 2019 11:18 am
4
Full Name: Roberto João Lopes Garcia
Company Details: Laser scanning services
Company Position Title: Owner
Country: BRAZIL
Skype Name: robjlg
Linkedin Profile: Yes
Has thanked: 24 times
Been thanked: 9 times
Contact:

Re: Increasing scan distances in Scene after registration?

Post by robjlg »

Once I had to reprocess scans already registered, similar to what you described. I followed the Leandre Robitaille suggestion in this post:

viewtopic.php?p=99395#p99395

It works! Thank you Leandre!
Post Reply

Return to “FARO”