Hi guys
I scanned an area with my Faro and when I processed in Scene I capped the distance of points from the scanner at 50m using the distance filter. The project has been registered but there is an area of interest about 75 meters away from one of the scanner positions.
Is there a procedure in Scene that will allow me to re-process some of the scans so my area of interest in included?
I see in Scene that it's possible to process scans after they've been registered and I've tried to do this but the distance is still capped at the original processing distance of 50m.
Kind regards, Andrew
Increasing scan distances in Scene after registration?
- landmeterbeuckx
- V.I.P Member
- Posts: 1615
- Joined: Tue May 01, 2012 5:19 pm
- 11
- Full Name: Lieven Beuckx
- Company Details: Studiebureau Beuckx
- Company Position Title: Owner
- Country: Belgium
- Linkedin Profile: Yes
- Has thanked: 183 times
- Been thanked: 548 times
Re: Increasing scan distances in Scene after registration?
I would write the numbers for rotation etc after reg for the scans you want to extend and then make a new project, import all but delete the ones not of interest and reset your values.fobos8 wrote: ↑Fri May 20, 2022 8:10 am Hi guys
I scanned an area with my Faro and when I processed in Scene I capped the distance of points from the scanner at 50m using the distance filter. The project has been registered but there is an area of interest about 75 meters away from one of the scanner positions.
Is there a procedure in Scene that will allow me to re-process some of the scans so my area of interest in included?
I see in Scene that it's possible to process scans after they've been registered and I've tried to do this but the distance is still capped at the original processing distance of 50m.
Kind regards, Andrew
- robjlg
- I have made 50-60 posts
- Posts: 54
- Joined: Mon Aug 19, 2019 11:18 am
- 4
- Full Name: Roberto João Lopes Garcia
- Company Details: Laser scanning services
- Company Position Title: Owner
- Country: BRAZIL
- Skype Name: robjlg
- Linkedin Profile: Yes
- Has thanked: 24 times
- Been thanked: 9 times
- Contact:
Re: Increasing scan distances in Scene after registration?
Once I had to reprocess scans already registered, similar to what you described. I followed the Leandre Robitaille suggestion in this post:
viewtopic.php?p=99395#p99395
It works! Thank you Leandre!
viewtopic.php?p=99395#p99395
It works! Thank you Leandre!