Hi All,
Does anyone have a printable Freestyle Scene Capture Calibration Pattern ?
I am assuming (hoping) it is similar to a David 3D "Print to scale" pattern that you print out and stick to a very flat surface.
Regards,
Mike.
Faro Scene Capture Calibration Pattern
- Mike Annear
- V.I.P Member
- Posts: 800
- Joined: Mon Jun 08, 2009 5:45 am
- 14
- Full Name: Mike Annear
- Company Details: The Yard Brisbane
- Company Position Title: Manager - 3D Design and Scanning
- Country: Australia
- Linkedin Profile: Yes
- Location: Hemmant, Queensland, Australia
- Has thanked: 122 times
- Been thanked: 196 times
- Contact:
- flohrd
- V.I.P Member
- Posts: 287
- Joined: Wed Jun 27, 2012 4:06 pm
- 11
- Full Name: Daniel Flohr
- Company Details: FARO
- Company Position Title: VP of Software Engineering
- Country: Germany
- Linkedin Profile: No
- Location: Stuttgart, Germany
- Has thanked: 2 times
- Been thanked: 7 times
- Contact:
Re: Faro Scene Capture Calibration Pattern
The carbon fiber calibration boards that are shipped with each device are calibrated very carefully. They are also very robust against environment effects (e.g. temperature).
Why would you like to print something by yourself which would only give you questionable results?
Why would you like to print something by yourself which would only give you questionable results?
- Mike Annear
- V.I.P Member
- Posts: 800
- Joined: Mon Jun 08, 2009 5:45 am
- 14
- Full Name: Mike Annear
- Company Details: The Yard Brisbane
- Company Position Title: Manager - 3D Design and Scanning
- Country: Australia
- Linkedin Profile: Yes
- Location: Hemmant, Queensland, Australia
- Has thanked: 122 times
- Been thanked: 196 times
- Contact:
Re: Faro Scene Capture Calibration Pattern
I should have mentioned that I am using the Faro capture software with an Asus Xtion sensor, not the Faro Freestyle. I have found some literature on how to calibrate the sensor itself using printable targets.
Cheers,
Mike.
Cheers,
Mike.
- flohrd
- V.I.P Member
- Posts: 287
- Joined: Wed Jun 27, 2012 4:06 pm
- 11
- Full Name: Daniel Flohr
- Company Details: FARO
- Company Position Title: VP of Software Engineering
- Country: Germany
- Linkedin Profile: No
- Location: Stuttgart, Germany
- Has thanked: 2 times
- Been thanked: 7 times
- Contact:
Re: Faro Scene Capture Calibration Pattern
OK, in this case you should check out the SCENE capture manual, Chapter 18.2. It describes the process.
Scene Capture comes with two printable patterns for this purpose, one for A4 and one for US Letter format.
You can find them in the "Cameras" folder or download here:
https://faro.box.com/s/9lht4ytbl7g2iilqhn9dpuabimka82h6
Scene Capture comes with two printable patterns for this purpose, one for A4 and one for US Letter format.
You can find them in the "Cameras" folder or download here:
https://faro.box.com/s/9lht4ytbl7g2iilqhn9dpuabimka82h6