Scanner Running Cost

Discuss all Trimble related issues here.
Post Reply
ABeckett
I have made <0 posts
I have made <0 posts
Posts: 5
Joined: Tue Apr 10, 2018 2:05 am
Full Name: Andrew Beckett
Company Details: Hellier Mcfarland
Company Position Title: 3D Environments Manager
Country: Australia
Linkedin Profile: No

Scanner Running Cost

Post by ABeckett » Wed Nov 28, 2018 9:54 pm

Hi All,

I'm trying to get an idea of service/calibration costs on the Tx6/Tx8 scanners by Trimble. Do you guys send them off at a time interval to get them checked? or do you work it until you see an issue?

Any experience sharing would be great.

kwiatu
I have made <0 posts
I have made <0 posts
Posts: 9
Joined: Wed Apr 12, 2017 9:31 am
Full Name: Jacek Kwiatkowski
Company Details: JL Consulting
Company Position Title: owner
Country: Poland
Skype Name: jkwiatu
Linkedin Profile: No

Re: Scanner Running Cost

Post by kwiatu » Thu Nov 29, 2018 12:01 pm

I've been using the TX8 since 2016 - did many projects around 4000 scans maybe more. TX8 always gets the job done. I also thought about calibration but I do not see a reason to get it done. Lately I did hi precision validation tests on a macrometric table. I had a sphere which I a moved 15mm and than again 10mm - The scan was taken from someting around 7-8 m ( distance to sphere ) The results I got showed and error @ 0,16mm in 3d space. The tests were done on 1-pass.

Pajosh2
I have made <0 posts
I have made <0 posts
Posts: 2
Joined: Thu Nov 08, 2018 6:12 pm
Full Name: Pavel Grée
Company Details: landsurveyor
Company Position Title: selfemployed
Country: Czech Republic
Linkedin Profile: No

Re: Scanner Running Cost

Post by Pajosh2 » Tue Dec 04, 2018 10:41 pm

Hi, it should be around 4K.

Post Reply

Return to “Trimble”