Align Register360 project to an existing .E57 or .PTS

Discuss all Leica Geosystems related issues here.
Post Reply
ajccad
I have made <0 posts
I have made <0 posts
Posts: 1
Joined: Fri Jan 17, 2020 3:53 am
Full Name: Arron Craig
Company Details: PDV Consultants
Company Position Title: Mechanical Design Engineer
Country: New Zealand
Linkedin Profile: No

Align Register360 project to an existing .E57 or .PTS

Post by ajccad »

I have some old .E57 and .PTS scan files of a site that were used to model the as-built condition. The scan and model share the same UCS which is just in an arbiturary location in the corner of a building.

I would like to C2C register/align some new scans to the old one using Register 360 so that the USC is in the same location for all new scans. I can do this in CloudCompare pretty easily but would prefer to do it in Reg360 before export.

Is this possible? Or is there a better method I can use?
User avatar
Carbix
V.I.P Member
V.I.P Member
Posts: 184
Joined: Sat Mar 16, 2019 1:36 am
Full Name: Daniel Loney
Company Details: Excelsior Measuring
Company Position Title: Owner
Country: Canada
Linkedin Profile: Yes
Location: Canada
Has thanked: 20 times
Been thanked: 26 times
Contact:

Re: Align Register360 project to an existing .E57 or .PTS

Post by Carbix »

If you import the E57 and they still have the UCS, you should be good to go. If not just manual set the UCS. The most recent Reg360 update made it super simple.

You could also Experiment with sitting virtual targets to help alignment
Daniel Loney - Owner
Excelsior Measuring inc.
Vancouver - Okanagan - Calgary
www.ExcelsiorLevel.com
Post Reply

Return to “Leica Geosystems”