Register 360 export to e57 includes deleted points- Help

Discuss all Leica Geosystems related issues here.
Post Reply
DoctaSayas
I have made 20-30 posts
I have made 20-30 posts
Posts: 21
Joined: Wed Jan 16, 2019 6:18 pm
Full Name: Caleb Sayers
Company Details: VIP AA
Company Position Title: Architectural Designer
Country: US
Linkedin Profile: Yes

Register 360 export to e57 includes deleted points- Help

Post by DoctaSayas » Fri Mar 15, 2019 8:21 pm

Need a little help here.

I just did a scan with a BLK360. It's a relatively small building, the project consists of 88 setups. I registered it with Cyclone Register 360, which I found really easy to work with, and overall was really impressed with.

For various reasons, not least of all working in Revit, I need to get the project into ReCap.

I exported it from Register 360 after finalizing, but the e57 file has all of the points that I took hours of clean-up to delete. What gives? How do I fix that so it exports a cleaned-up point cloud?

Thanks!

User avatar
gsisman
V.I.P Member
V.I.P Member
Posts: 226
Joined: Fri Oct 07, 2016 1:51 pm
Full Name: Steve Long
Company Details: Montgomery County DOT _ MD
Company Position Title: Land Survey Supervisor
Country: United States
Skype Name: gsisman1
Linkedin Profile: Yes

Re: Register 360 export to e57 includes deleted points- Help

Post by gsisman » Fri Mar 15, 2019 9:40 pm

DoctaSayas wrote:
Fri Mar 15, 2019 8:21 pm
Need a little help here.

I just did a scan with a BLK360. It's a relatively small building, the project consists of 88 setups. I registered it with Cyclone Register 360, which I found really easy to work with, and overall was really impressed with.

For various reasons, not least of all working in Revit, I need to get the project into ReCap.

I exported it from Register 360 after finalizing, but the e57 file has all of the points that I took hours of clean-up to delete. What gives? How do I fix that so it exports a cleaned-up point cloud?

Thanks!
Caleb,

I agree with you about the Reg 360 software as long as they add a little bit more of necessary workflow tools in the next versions. I find it easy to work with. Wish there was a splitting of the error shown into Dx, Dy, and Dz errors instead of total 3D when looking at Control fit.
I found the same thing with the E57 going to Recap, not sure if that is accidental or by design (to push more people towards Jetstream and CloudWorks-Leica in-CAD solution).
It doesn't honor the clips -very frustrating. I want E57 because of all the photo stuff. Hoping that gets resolved.
Some of the same issues and some slightly different ones in regards to versions within the same project are noted on this thread:

https://laserscanningforum.com/forum/vi ... 992#p75992

User avatar
topogeo
I have made 60-70 posts
I have made 60-70 posts
Posts: 63
Joined: Fri May 02, 2014 1:38 pm
Full Name: piercarlo roasio
Company Details: studio roasio
Company Position Title: titolare
Country: italy
Linkedin Profile: No

Re: Register 360 export to e57 includes deleted points- Help

Post by topogeo » Sun Mar 17, 2019 3:21 pm

In the E57 export the canceled points are maintained.
Only with PTS are ignored
(see the image taken from the help of Register360).

I agree that Register360 is very easy ... but it needs improvement ..
For example, as suggested by Gsismam, error in X.Y.Z for checkpoints.

Piercarlo
You do not have the required permissions to view the files attached to this post.

mjfpfg
I have made <0 posts
I have made <0 posts
Posts: 6
Joined: Thu May 30, 2019 2:04 am
Full Name: Miguel Guimarães
Company Details: Miguel J Guimaraes - Serv Top
Company Position Title: Owner
Country: Portugal
Linkedin Profile: No

Re: Register 360 export to e57 includes deleted points- Help

Post by mjfpfg » Fri May 31, 2019 6:04 pm

Hi guys.
But with pts the images don´t go into recap, right?

User avatar
TimJervis
I have made 20-30 posts
I have made 20-30 posts
Posts: 25
Joined: Mon Mar 04, 2019 8:56 pm
Full Name: Tim Jervis
Company Details: Global Survey
Company Position Title: Business Development Manager
Country: New Zealand
Linkedin Profile: Yes

Re: Register 360 export to e57 includes deleted points- Help

Post by TimJervis » Mon Jun 03, 2019 9:44 pm

mjfpfg wrote:
Fri May 31, 2019 6:04 pm
Hi guys.
But with pts the images don´t go into recap, right?
Hey Miguel,

.pts is an unstructured points file, so it won't take any setup information through (so no images). It will be just a single cloud without setups.
Regards,

Tim

miguel.antunes
I have made <0 posts
I have made <0 posts
Posts: 4
Joined: Wed Aug 22, 2018 9:50 am
Full Name: Miguel Angelo Morais Antunes
Company Details: Engineering
Company Position Title: Surveyor
Country: Portugal
Linkedin Profile: No

Re: Register 360 export to e57 includes deleted points- Help

Post by miguel.antunes » Thu Jun 06, 2019 11:48 am

hey ,

With the new version , you can go to settings and below there's written Export cleand point for E57, PTG and PTX formats.

Thanks, Miguel Antunes

DoctaSayas
I have made 20-30 posts
I have made 20-30 posts
Posts: 21
Joined: Wed Jan 16, 2019 6:18 pm
Full Name: Caleb Sayers
Company Details: VIP AA
Company Position Title: Architectural Designer
Country: US
Linkedin Profile: Yes

Re: Register 360 export to e57 includes deleted points- Help

Post by DoctaSayas » Tue Jun 18, 2019 4:33 pm

Thanks!

This is a huge improvement!

Post Reply

Return to “Leica Geosystems”