Missing RTC360 Project-File for Import in Register360

Discuss all Leica Geosystems related issues here.
Post Reply
wandsleb
I have made <0 posts
I have made <0 posts
Posts: 2
Joined: Mon Dec 17, 2018 11:01 am
Full Name: Philipp Wandsleb
Company Details: TRIGIS GeoServices GmbH
Company Position Title: 3D-Laserscanning
Country: DE
Linkedin Profile: No

Missing RTC360 Project-File for Import in Register360

Post by wandsleb » Mon Dec 17, 2018 11:36 am

Hello Everyone,

i recently got a RTC360 for testing. I was impressed by the speed and the handling and first pointcloud impressions on the tablet are superb.
I did some scans and i am now trying to import the scans into Register 360.

Unfortunately i only copied the Scandata and i am missing the project-file (filetype .prj or similar). I dont have acces to the data anymore.
Importing the scan-data only does nothing.
Refering to the Leica Support i need the project-file in order to import the scans. They also told me that an empty dummy project-file would do the job aswell.

Can someone provide such empty Project file to me?
(i am not talking about the files SetupPostion and [crypticname] from the scan data folder, i got these)
So far the scans are useless to me...

Any help on the case is very much appreciated.
Last edited by wandsleb on Mon Dec 17, 2018 3:05 pm, edited 1 time in total.

User avatar
SCCS RTC
V.I.P Member
V.I.P Member
Posts: 653
Joined: Sun Jul 17, 2011 9:30 am
Full Name: Phil Marsh
Company Details: SCCS Survey Equipment Limited
Company Position Title: Reality Capture Manager
Country: UK
Skype Name: Phil.H.Marsh
Linkedin Profile: Yes
Location: Barnsley, UK
Been thanked: 4 times
Contact:

Re: Missing RTC360 Project-File for Imort in Register360

Post by SCCS RTC » Mon Dec 17, 2018 1:11 pm

Unzip this file and put it back into your raw data folder.

project.rtc360.zip

I hope this helps? #ThePowerOfLSF :ugeek:
You do not have the required permissions to view the files attached to this post.
SCCS Survey Equipment Limited
M: 07540 201383
E: [email protected]
W: www.sccsurvey.co.uk
Image

tomii7
V.I.P Member
V.I.P Member
Posts: 197
Joined: Wed Dec 23, 2009 9:38 am
Full Name: Tomasz Gerlich
Company Details: OutPut Precision Ltd
Company Position Title: Owner - 3D Laser Scanning Specialist
Country: PL UK International
Skype Name: tomek.gerlich
Linkedin Profile: Yes
Location: Everywhere
Been thanked: 1 time
Contact:

Re: Missing RTC360 Project-File for Imort in Register360

Post by tomii7 » Mon Dec 17, 2018 3:43 pm

SCCS RTC wrote:
Mon Dec 17, 2018 1:11 pm
#ThePowerOfLSF :ugeek:

Phil,
Good hashtag! :D ;)

TG
-----
Best Regards,
Tomasz Gerlich

tomasz.gerlich[at]outputprecision.com tomaszgerlich[at]gmail.com
+44 7756613300

www.outputprecision.com - Reality Capture
www.realitycapture3d.com - Matterport
www.tomgerlich.com

OutPut Precision Ltd, Manchester, UK

wandsleb
I have made <0 posts
I have made <0 posts
Posts: 2
Joined: Mon Dec 17, 2018 11:01 am
Full Name: Philipp Wandsleb
Company Details: TRIGIS GeoServices GmbH
Company Position Title: 3D-Laserscanning
Country: DE
Linkedin Profile: No

Re: Missing RTC360 Project-File for Import in Register360

Post by wandsleb » Tue Dec 18, 2018 8:15 am

Exactly what i needed, thanks a lot.

Btw. i figured its just a plain empty file. So i created an empty file called "project.rtc360".
Guess what, it also worked. Leica, just why?
Thanks again nevertheless.

#ThePowerOfLSF
like that

User avatar
stevenramsey
Global Moderator
Global Moderator
Posts: 1697
Joined: Sun Aug 12, 2007 9:22 pm
Full Name: Steven Ramsey
Company Details: 4DMax
Company Position Title: Technical Specialist Scanning
Country: UK
Skype Name: steven.ramsey
Linkedin Profile: Yes
Location: London
Has thanked: 2 times
Been thanked: 1 time
Contact:

Re: Missing RTC360 Project-File for Import in Register360

Post by stevenramsey » Tue Dec 18, 2018 12:49 pm

It's just a pointer for the software to know that the folders in the same location is RTC data.
Steven Ramsey

Home [email protected]
Work [email protected]
Mobile +44 7766 310 915

jamesworrell
V.I.P Member
V.I.P Member
Posts: 293
Joined: Mon Jun 16, 2014 1:45 pm
Full Name: James Worrell
Company Details: Bennett and Francis
Company Position Title: Director
Country: Australia
Linkedin Profile: Yes
Location: Brisbane, Queensland, Australia
Been thanked: 2 times
Contact:

Re: Missing RTC360 Project-File for Import in Register360

Post by jamesworrell » Tue Dec 18, 2018 11:42 pm

stevenramsey wrote:
Tue Dec 18, 2018 12:49 pm
It's just a pointer for the software to know that the folders in the same location is RTC data.
Personally the arrangement is a pain in the arse .. we copy off the USB's into a folder on an "ingest" workstation .. so we end up with many jobs sitting in the one folder ..

THEN to actually ingest - we are forced to copy the data to a different folder .. either a sub-folder .\CurrentImport .. or on to a different drive (more typically an SSD) .. otherwise - if you "point" R360 at your folder with the project file in it - it wants to load ALL the (completely unrelated) jobs in that folder ..

What was wrong with adding a import-by-folder like damn near every other software platform in existence? The file approach is a messy (horrid UX) complexity that is obviously leading to confusion (ala this thread) or makes a dogs breakfast of your workflow (unrelated jobs)

[edit - just read this back .. probably a bit harsh .. ;-p but yeah my first impression was damn that's "ugly" followed by "why?"]
Last edited by jamesworrell on Wed Dec 19, 2018 11:41 am, edited 1 time in total.

User avatar
pburrows145
V.I.P Member
V.I.P Member
Posts: 1768
Joined: Wed Sep 12, 2007 9:16 am
Full Name: Paul Burrows
Company Details: Leica Geosystems Europe
Company Position Title: Scanning Solutions Manager - Europe
Country: UK
Linkedin Profile: Yes
Location: UK
Has thanked: 8 times
Been thanked: 5 times

Re: Missing RTC360 Project-File for Import in Register360

Post by pburrows145 » Wed Dec 19, 2018 9:11 am

It is being looked at. I am hoping the requirement can be removed (fingers crossed). As Steven says, it's merely a pointer.

travissachs
I have made 10-20 posts
I have made 10-20 posts
Posts: 10
Joined: Fri May 04, 2018 2:44 pm
Full Name: Travis Sachs
Company Details: High Definition 3D Laser Scanning
Company Position Title: Chief Operating Officer
Country: Canada
Linkedin Profile: Yes

Re: Missing RTC360 Project-File for Import in Register360

Post by travissachs » Fri Apr 12, 2019 3:48 am

I am also having an issue importing rtc data to register 360. I can import no problem to cyclone but when I try with Reg360, i just get the red circle.
I have the project.rtc360 in the raw data folder and still no luck . Any thoughts?

User avatar
Phil Marsh
Administrator
Administrator
Posts: 2194
Joined: Sun Aug 12, 2007 2:28 pm
Full Name: Phil Marsh
Company Details: Laser Scanning Forum Ltd
Company Position Title: Technical Director
Country: UK
Skype Name: phil.h.marsh
Linkedin Profile: Yes
Location: Barnsley, UK
Has thanked: 4 times
Been thanked: 2 times
Contact:

Re: Missing RTC360 Project-File for Import in Register360

Post by Phil Marsh » Fri Apr 12, 2019 7:43 am

Could you post a screen shot?
LASER SCANNING FORUM
[email protected]

travissachs
I have made 10-20 posts
I have made 10-20 posts
Posts: 10
Joined: Fri May 04, 2018 2:44 pm
Full Name: Travis Sachs
Company Details: High Definition 3D Laser Scanning
Company Position Title: Chief Operating Officer
Country: Canada
Linkedin Profile: Yes

Re: Missing RTC360 Project-File for Import in Register360

Post by travissachs » Sat Apr 13, 2019 3:44 pm

https://photos.google.com/album/AF1QipM ... _RedfExjaV
When I try to drag and drop to the file folder to the import files tab in REg360, I just display's the red circle with a cross in it

Post Reply

Return to “Leica Geosystems”