Leica Cyclone REGISTER 360
- steves01x
- V.I.P Member
- Posts: 544
- Joined: Tue Jul 21, 2015 3:58 pm
- 8
- Full Name: Steve Smith
- Company Details: Scanning
- Company Position Title: Surveyor
- Country: Scotland
- Linkedin Profile: Yes
- Has thanked: 31 times
- Been thanked: 57 times
Re: Leica Cyclone REGISTER 360
I take it there is no way to import a partial project in Register 360?
- JLarson
- V.I.P Member
- Posts: 198
- Joined: Mon Jun 14, 2010 4:57 pm
- 13
- Full Name: Jason Larson
- Company Details: VHB
- Company Position Title: Geomatics Manager
- Country: US
- Linkedin Profile: Yes
- Location: New York City
- Has thanked: 1 time
- Been thanked: 25 times
Re: Leica Cyclone REGISTER 360
I've downloaded and installed. I tried importing a P20 project where we used our typical "traversing" method with setup, and targets at BS and FS. 360 didn't seem to know how to deal with this. There is a note in the release notes on targets, that a minimum of three are needed. So question is: does 360 even support our normal workflow? Do we need to go to a free station/resection type method? To me, this would defeat one of the strengths of Leica scanners, treating them like traditional survey instruments. With free station method i would need to setup six targets vs. two for traversing. This seems like a big step backwards in productivity to me.
Jason Larson, PLS
- mmarsault
- V.I.P Member
- Posts: 154
- Joined: Tue Mar 01, 2011 2:33 pm
- 13
- Full Name: Matthieu Marsault
- Company Details: Murphy Surveys Ltd.
- Company Position Title: Laser Scanning Manager
- Country: UK
- Linkedin Profile: No
- Location: London, UK
- stevenramsey
- Global Moderator
- Posts: 1937
- Joined: Sun Aug 12, 2007 9:22 pm
- 16
- Full Name: Steven Ramsey
- Company Details: 4DMax
- Company Position Title: Technical Specialist Scanning
- Country: UK
- Skype Name: steven.ramsey
- Linkedin Profile: Yes
- Location: London
- Has thanked: 30 times
- Been thanked: 72 times
- Contact:
Re: Leica Cyclone REGISTER 360
When you drag and drop or import the project file partial import is done by just de checking the tiks next to the scans you don't want.
- stevenramsey
- Global Moderator
- Posts: 1937
- Joined: Sun Aug 12, 2007 9:22 pm
- 16
- Full Name: Steven Ramsey
- Company Details: 4DMax
- Company Position Title: Technical Specialist Scanning
- Country: UK
- Skype Name: steven.ramsey
- Linkedin Profile: Yes
- Location: London
- Has thanked: 30 times
- Been thanked: 72 times
- Contact:
Re: Leica Cyclone REGISTER 360
Reg360 doesn't support survey workflows. C2C and free station resections (3 targets)JLarson wrote: ↑Wed Oct 18, 2017 9:06 pm I've downloaded and installed. I tried importing a P20 project where we used our typical "traversing" method with setup, and targets at BS and FS. 360 didn't seem to know how to deal with this. There is a note in the release notes on targets, that a minimum of three are needed. So question is: does 360 even support our normal workflow? Do we need to go to a free station/resection type method? To me, this would defeat one of the strengths of Leica scanners, treating them like traditional survey instruments. With free station method i would need to setup six targets vs. two for traversing. This seems like a big step backwards in productivity to me.
- Jason Warren
- Administrator
- Posts: 4224
- Joined: Thu Aug 16, 2007 9:21 am
- 16
- Full Name: Jason Warren
- Company Details: Laser Scanning Forum Ltd
- Company Position Title: Co-Founder
- Country: UK
- Skype Name: jason_warren
- Linkedin Profile: No
- Location: Retford, UK
- Has thanked: 443 times
- Been thanked: 246 times
- Contact:
Re: Leica Cyclone REGISTER 360
Will it support survey workflows in the near future, or is REGISTER 360 for the BLK360 users, and what follows?stevenramsey wrote: ↑Thu Oct 19, 2017 10:59 amReg360 doesn't support survey workflows, C2C and free station resections (3 targets)JLarson wrote: ↑Wed Oct 18, 2017 9:06 pm I've downloaded and installed. I tried importing a P20 project where we used our typical "traversing" method with setup, and targets at BS and FS. 360 didn't seem to know how to deal with this. There is a note in the release notes on targets, that a minimum of three are needed. So question is: does 360 even support our normal workflow? Do we need to go to a free station/resection type method? To me, this would defeat one of the strengths of Leica scanners, treating them like traditional survey instruments. With free station method i would need to setup six targets vs. two for traversing. This seems like a big step backwards in productivity to me.
Jason Warren
Co_Founder
Dedicated to 3D Laser Scanning
LaserScanningForum
Co_Founder
Dedicated to 3D Laser Scanning
LaserScanningForum
-
- V.I.P Member
- Posts: 220
- Joined: Wed Dec 23, 2009 9:38 am
- 14
- Full Name: Tomasz Gerlich
- Company Details: OutPut Precision Ltd
- Company Position Title: Director
- Country: UK
- Skype Name: tomek.gerlich
- Linkedin Profile: Yes
- Location: Manchester, UK
- Has thanked: 5 times
- Been thanked: 7 times
- Contact:
Re: Leica Cyclone REGISTER 360
Honestly, that's a good question... Personally, I think in the near future (another update of Register360) it might be possibleWill it support survey workflows in the near future, or is REGISTER 360 for the BLK360 users, and what follows?Jason Warren wrote: ↑Thu Oct 19, 2017 12:33 pm Reg360 doesn't support survey workflows, C2C and free station resections (3 targets)
-----
Best Regards,
Tomasz Gerlich
tomaszgerlich[at]outputprecision.com or tomaszgerlich[at]gmail.com
+44 7756613300
www.outputprecision.com - Reality Capture
www.realitycapture3d.com - Matterport
OutPut Precision Ltd, Manchester, UK
Best Regards,
Tomasz Gerlich
tomaszgerlich[at]outputprecision.com or tomaszgerlich[at]gmail.com
+44 7756613300
www.outputprecision.com - Reality Capture
www.realitycapture3d.com - Matterport
OutPut Precision Ltd, Manchester, UK
- JLarson
- V.I.P Member
- Posts: 198
- Joined: Mon Jun 14, 2010 4:57 pm
- 13
- Full Name: Jason Larson
- Company Details: VHB
- Company Position Title: Geomatics Manager
- Country: US
- Linkedin Profile: Yes
- Location: New York City
- Has thanked: 1 time
- Been thanked: 25 times
Re: Leica Cyclone REGISTER 360
Hmmm... That's disappointing.stevenramsey wrote: ↑Thu Oct 19, 2017 10:59 am
Reg360 doesn't support survey workflows, C2C and free station resections (3 targets)
As others have asked, is this something we can expect to see in the future, or is this the direction forward?
Jason Larson, PLS
-
- I have made 30-40 posts
- Posts: 30
- Joined: Mon Jun 30, 2008 3:31 am
- 15
- Full Name: AK-Man
- Company Details: Surveyor
- Company Position Title: PLS
- Country: USA
Re: Leica Cyclone REGISTER 360
I went to myworld last night...wouldn't successfully download.
Went there today and it's not even there to download. What is up?
Went there today and it's not even there to download. What is up?
- topogeo
- V.I.P Member
- Posts: 144
- Joined: Fri May 02, 2014 1:38 pm
- 9
- Full Name: piercarlo roasio
- Company Details: studio roasio
- Company Position Title: titolare
- Country: italy
- Linkedin Profile: No
- Has thanked: 24 times
- Been thanked: 25 times
Re: Leica Cyclone REGISTER 360
very well for the ability to make Register 360's dowload.
News on the new sign for the BLK360?
we are waiting for the HDR with impatience
and Leica's app to pilot / set up the BLK360?
I can not wait to be able to do high quality scans without having to carry the IPAD Pro (... the "one - button" workflow is what I like the most .. now you can ' do only with medium resolution)
Piercarlo
News on the new sign for the BLK360?
we are waiting for the HDR with impatience
and Leica's app to pilot / set up the BLK360?
I can not wait to be able to do high quality scans without having to carry the IPAD Pro (... the "one - button" workflow is what I like the most .. now you can ' do only with medium resolution)
Piercarlo