Has anyone used field 360 with P40 with the latest release
Also what hardware are you using ( if not an Ipad)
Thanks
Howard Wood
Field 360 & P40
-
- I have made 20-30 posts
- Posts: 25
- Joined: Thu Oct 21, 2010 7:31 pm
- 13
- Full Name: Howard James Wood
- Company Details: Ex Site surveying services ltd
- Company Position Title: Ex Manging director
- Country: UK
- Linkedin Profile: Yes
-
- I have made 80-90 posts
- Posts: 87
- Joined: Wed Oct 10, 2018 5:12 pm
- 5
- Full Name: Scott Nelson
- Company Details: Nelson Parametrics Inc
- Company Position Title: Owner
- Country: Canada
- Linkedin Profile: Yes
- Has thanked: 1 time
- Been thanked: 3 times
Re: Field 360 & P40
I tried it, but I'm so used to using PX simulator on a ms surface I just went back to using that. Seems to work fine though.
-
- I have made 60-70 posts
- Posts: 61
- Joined: Sun Jan 14, 2018 2:06 pm
- 6
- Full Name: Dirkie Uys
- Company Details: Landpartners
- Company Position Title: Surveyor
- Country: Australia
- Skype Name: duaus
- Linkedin Profile: No
- Has thanked: 3 times
- Been thanked: 10 times
Re: Field 360 & P40
Have used it using an iPad. Works as it says it does.howardwood wrote: ↑Mon Apr 19, 2021 6:39 am Has anyone used field 360 with P40 with the latest release
Also what hardware are you using ( if not an Ipad)
Thanks
Howard Wood
Optimizing the cloud on the ipad is bad though. 3mm@10m scans, less than 20m apart wouldn't optimize more than 20 out of 30 times. Lots of vertical and horizontal surfaces to align to. Manual just placing it and accepting it works ok.
Problem was the imported registration acted up. All scans were done with compensator, but in cyclone core it wouldn't optimize the data. Needed to toggle the scan unlevel for it to register, then add control and then level them again.
Time wasted on slower import and fixing issues, might as well roll back to 9.4.2 and save the time there.
-
- I have made 20-30 posts
- Posts: 25
- Joined: Thu Oct 21, 2010 7:31 pm
- 13
- Full Name: Howard James Wood
- Company Details: Ex Site surveying services ltd
- Company Position Title: Ex Manging director
- Country: UK
- Linkedin Profile: Yes