Why should add tolerance to the objects in the Scan to BIM projects?

Please post any tips or advice you have in general relating to laser scanning either whilst onsite or office based.
Post Reply
nguyen
I have made 40-50 posts
I have made 40-50 posts
Posts: 42
Joined: Tue Sep 15, 2020 7:48 am
3
Full Name: nguyen nguyen
Company Details: ViBIM
Company Position Title: BIM consultant
Country: Vietnam
Linkedin Profile: Yes
Has thanked: 5 times
Contact:

Why should add tolerance to the objects in the Scan to BIM projects?

Post by nguyen »

For #renovation or retrofit projects, it is inevitable that some areas are out of shape. So in the process of creating as-built models, it’s necessary to consider the BIM deviation of all warped objects from the horizontal or vertical plane.

So why you should add tolerance to these objects and how to do this. The answer is available here: https://vibims.com/create-a-functional- ... edium=post
You do not have the required permissions to view the files attached to this post.
ViBIM - Specialize in Scan to BIM services
Website: www.vibims.com
Email: [email protected]
Post Reply

Return to “Tips & Advice”