Reality Vs. Model - How to deal with crooked walls?

3D Studio MAX, 3D Coat, Lightwave, ZBrush, VRMesh, TopoGun, Blender, Rhino, Trimble Sketchup Etc.
User avatar
GCFdesign
I have made 30-40 posts
I have made 30-40 posts
Posts: 35
Joined: Wed Sep 04, 2019 7:23 am
Full Name: Gary Fellows
Company Details: GCF Design Limited
Company Position Title: Director
Country: United Kingdom
Linkedin Profile: Yes
Has thanked: 8 times
Been thanked: 3 times

Re: Reality Vs. Model - How to deal with crooked walls?

Post by GCFdesign » Tue Sep 10, 2019 2:53 pm

GCF Design Limited can readily offer you such modelling services.

Get in touch.

https://gcfdesign.wixsite.com/gcfdesign/image-library
Regards,

Gary Fellows

Director

GCF Design Limited

https://gcfdesign.wixsite.com/gcfdesign

Jamesrye
V.I.P Member
V.I.P Member
Posts: 451
Joined: Mon Aug 11, 2008 4:13 pm
Full Name: James Rye
Company Details: Merrett Survey Partnership
Company Position Title: Spatial Analyst
Been thanked: 2 times

Re: Reality Vs. Model - How to deal with crooked walls?

Post by Jamesrye » Thu Sep 12, 2019 9:10 am

Here's a nice example of something that was easy to model in Rhino (about 1hr). It matches the point cloud to within +/-5mm. Sure, you could do it in Revit, but it's much harder.

Image
You do not have the required permissions to view the files attached to this post.

User avatar
GCFdesign
I have made 30-40 posts
I have made 30-40 posts
Posts: 35
Joined: Wed Sep 04, 2019 7:23 am
Full Name: Gary Fellows
Company Details: GCF Design Limited
Company Position Title: Director
Country: United Kingdom
Linkedin Profile: Yes
Has thanked: 8 times
Been thanked: 3 times

Re: Reality Vs. Model - How to deal with crooked walls?

Post by GCFdesign » Thu Sep 12, 2019 9:15 am

Jamesrye wrote:
Thu Sep 12, 2019 9:10 am
Here's a nice example of something that was easy to model in Rhino (about 1hr). It matches the point cloud to within +/-5mm. Sure, you could do it in Revit, but it's much harder.

Image
The final output depends upon its future use or purpose.

Certainly Revit could achieve this, however, like you say, you should pick the tools which suit you.

Nice model :)
Regards,

Gary Fellows

Director

GCF Design Limited

https://gcfdesign.wixsite.com/gcfdesign

Post Reply

Return to “Modeling Software”