EdgeWise DPI-8 Webinar data-set processed in InfiPoints
- TommyMaddox
- V.I.P Member
- Posts: 514
- Joined: Mon Apr 25, 2016 7:15 pm
- 7
- Full Name: Tommy R Maddox III
- Company Details: ONSITE3D
- Company Position Title: Director of Technology
- Country: USA
- Linkedin Profile: Yes
- Location: Calgary, Alberta
- Has thanked: 67 times
- Been thanked: 130 times
EdgeWise DPI-8 Webinar data-set processed in InfiPoints
youtu.be/3fZGyNogDBY
InfiPoints offers direct import + extraction of the scans produced by the DotProduct DPI-8 Scanner. They also offer "InfiPoints on a Tablet" for the use of in-field automatic feature extraction on the same tablet that the DPI-8 uses.
This particular data set was the one captured in the EdgeWise DotProduct DPI-8 Webinar on September 15th, 2016
I've processed the data in InfiPoints, and applied some minor corrections to show how easily the data can be handled.
NOTE: The screen wobbles rapidly during this demo. For some reason this only happens when I run the screen capture software I'm using, so it really is a much more fluid experience in person.
Time Metrics:
Import with Extraction of Pipes and Planes: 2 minutes and 3 seconds
(Pipes and Plane export took 3 seconds)
Manual cleanup: approximately 10 minutes. Would have been quicker with practice and without the screen wobble issue experienced when recording.
I had practiced once before, and found that using noise-reduction features in InfiPoints on this somewhat sparse data-set resulted in a bit more difficulty finishing out the piping, so in the video, you'll notice I opted not to run the noise reduction.
You'll also notice the method of assigning all of the points (+ clearance range) attributed to pipe group or groups onto its own layer for further processing or interference checking.
-
- I have made 10-20 posts
- Posts: 18
- Joined: Fri Jun 03, 2016 4:23 am
- 7
- Full Name: Shun Higashide
- Company Details: Elysium Co. Ltd.
- Company Position Title: Global Business Analyst
- Country: Japan
- Linkedin Profile: Yes
- Location: Japan
- Contact:
Re: EdgeWise DPI-8 Webinar data-set processed in InfiPoints
Hi Tommy,
This is an interesting case as I personally saw the webinar recording and was curious about how the process
would take place in InfiPoints.
Thank you very much for giving this a try and making a video of it.
By the way, the product where InfiPoints feature extraction runs on the DPI-8 is called "InfiPoints DP"
This is an interesting case as I personally saw the webinar recording and was curious about how the process
would take place in InfiPoints.
Thank you very much for giving this a try and making a video of it.
By the way, the product where InfiPoints feature extraction runs on the DPI-8 is called "InfiPoints DP"