slow processing

Discuss all ClearEdge3D related issues here.
Post Reply
Pajosh2
I have made <0 posts
I have made <0 posts
Posts: 8
Joined: Thu Nov 08, 2018 6:12 pm
Full Name: Pavel Grée
Company Details: XGEO
Company Position Title: owner
Country: Czech Republic
Linkedin Profile: No

slow processing

Post by Pajosh2 »

Hi, I am processing 400GB (80scans in E57 from rafinery) pointcloud in TrimbleEdgewise, just pipes. It is taking so looooong-10 days.
TEW runing on 2xXenon with 4 SSD, RAM128GB.
TEW utilize only 8-11 percent.
How can I speed it up? Thanx. P.

Pajosh2
I have made <0 posts
I have made <0 posts
Posts: 8
Joined: Thu Nov 08, 2018 6:12 pm
Full Name: Pavel Grée
Company Details: XGEO
Company Position Title: owner
Country: Czech Republic
Linkedin Profile: No

Re: slow processing

Post by Pajosh2 »

Problem solved - run as many EW as possible for your HW, you get fast wanted derivates. You can merge derivates but pointcloud not yet. PG

User avatar
idessin
I have made <0 posts
I have made <0 posts
Posts: 5
Joined: Tue Mar 10, 2015 3:16 pm
Full Name: Comparelli Fabio
Company Details: BIMservice
Company Position Title: BIM Modeler
Country: Suisse
Linkedin Profile: Yes

Re: slow processing

Post by idessin »

Hi, what is EW and HW ? i have slow issue on a large project ( 220 scan in .rcp format ) its take so long ( ~2 week )

Have you a solutions ?

e.trivinibellini
I have made <0 posts
I have made <0 posts
Posts: 5
Joined: Sat Apr 02, 2016 2:49 pm
Full Name: Enrico Trivini Bellini
Company Details: WESCAN Solutions
Company Position Title: WESCAN Solutions
Country: Italia
Linkedin Profile: Yes
Location: Bergamo
Contact:

Re: slow processing

Post by e.trivinibellini »

EW = Edgewise
HW = Hardware

brian715
V.I.P Member
V.I.P Member
Posts: 196
Joined: Wed Apr 06, 2016 3:24 pm
Full Name: Brian Boehmer
Company Details: Meridian Eng.
Company Position Title: LiDAR Technician
Country: United States
Linkedin Profile: No
Has thanked: 12 times
Been thanked: 5 times

Re: slow processing

Post by brian715 »

decimate your point cloud. You don't need all those points to create pipes, beams and walls. I usually export from Scene every 5th row and every 5th column for edgewise. This is plenty of points.

Freeze1979
I have made <0 posts
I have made <0 posts
Posts: 2
Joined: Fri Feb 22, 2019 7:52 am
Full Name: Danijel Ceh
Company Details: Go2BIM
Company Position Title: Techical Manager
Country: Croatia
Been thanked: 2 times

Re: slow processing

Post by Freeze1979 »

+1 on decimation. As brian715 said, you don't need full point cloud density to extract pipes and other stuff...

Post Reply

Return to “ClearEdge3D”