2022 version of Recap

Discuss Autodesk ReCap Studio software here.
Post Reply
gary_lawes
I have made 10-20 posts
I have made 10-20 posts
Posts: 13
Joined: Mon Dec 12, 2016 6:30 pm
7
Full Name: Gary Lawes
Company Details: jagged Edge Design Ltd
Company Position Title: Owner
Country: England
Linkedin Profile: Yes
Been thanked: 4 times

2022 version of Recap

Post by gary_lawes »

Just used the latest release for the first time this morning. Obviously some big changes in there as the automatic resistration has dramatically failed (all in with no errors, but nothing aligns). Fortunately a small project of 60 scans, so will have to manually align them all, or maybe bring them in again.
Anyone else used it yet? I am assuming that something has changed in the interface, that I have missed.
gary_lawes
I have made 10-20 posts
I have made 10-20 posts
Posts: 13
Joined: Mon Dec 12, 2016 6:30 pm
7
Full Name: Gary Lawes
Company Details: jagged Edge Design Ltd
Company Position Title: Owner
Country: England
Linkedin Profile: Yes
Been thanked: 4 times

Re: 2022 version of Recap

Post by gary_lawes »

Think I have got to the bottom of it.
First import went straight from "Import" to "Index" with no option to register. I started it off again and this time it went through the process as normal. Not sure what went wrong, but all good now.
teggs
I have made <0 posts
I have made <0 posts
Posts: 5
Joined: Mon Nov 11, 2019 1:57 pm
4
Full Name: Attewell
Company Details: Greenbank
Company Position Title: Greenbank
Country: United Kingdom
Linkedin Profile: No

Re: 2022 version of Recap

Post by teggs »

If you are not signed into Autodesk it wont register the scans. It will just pile them on top of each other. it could have been that.

Rich
VXGrid
V.I.P Member
V.I.P Member
Posts: 544
Joined: Fri Feb 24, 2017 10:47 am
7
Full Name: Martin Graner
Company Details: PointCab GmbH
Company Position Title: Research and Development
Country: Germany
Linkedin Profile: No
Has thanked: 160 times
Been thanked: 175 times
Contact:

Re: 2022 version of Recap

Post by VXGrid »

gary_lawes wrote: Thu Apr 15, 2021 3:52 pm Think I have got to the bottom of it.
First import went straight from "Import" to "Index" with no option to register. I started it off again and this time it went through the process as normal. Not sure what went wrong, but all good now.
As Rich mentioned this happens if you are not signed in.
Then ReCap won't show ReCap Pro at the top, but only ReCap, and only in Pro is the Registration available.
Post Reply

Return to “Autodesk ReCap Studio”